We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Xenon projector lamp, cylindrical bulb, metal end caps, cable attached

Jaspertronics

Jaspertronics DP-3000-2.2kW-LAMP 2200W 2000 Hour Xenon Projector Lamp

SKU CH-PVGT-GG005

A 2200W xenon lamp rated for 2000 hours in compatible Barco cinema projectors

  • TypeProject Lamp
  • Weight6.0000
  • High-output 2200W xenon arc brightness for cinema screens
  • 2000-hour burst warranty rating for extended runtime
  • Precise 26.5V and 83A electrical specs ensure correct fit
  • 294mm length with 123mm LCL and 4mm cold arc gap
  • Compatible with Barco DP2K and DP4K projector series

Professional cinema projector lamp

This 2200W xenon lamp is built for compatible Barco digital cinema projectors including the DP-3000 series. It serves theater operators and screening rooms that need a direct replacement with correct electrical fitment and high-output brightness. The lamp is rated at 26.5V and 83A with an operating range of 15402200W. It is not intended for buyers who need a lower-wattage lamp or a different projector platform.

Thermals and power stability

The lamp operates at 2200W input power within the specified 15402200W range to maintain stable output in demanding environments. Correct voltage and current matching at 26.5V and 83A supports consistent thermal behaviour during extended screenings. Warranty hours are listed as 1500 hours with a 2000-hour figure noted for burst conditions. It does not suit installations that cannot supply the required electrical parameters.

Physical fitment and installation

Key dimensions include 294mm lamp length, 123mm LCL, 4mm cold arc gap, 53mm bulb diameter, and 132mm cable length to support correct installation in compatible Barco models. The unit weighs 6.0000 and is powered by Ushio technology for dependable replacement. Build quality targets reliable performance in professional theater settings. It will not fit projectors outside the listed DP2K and DP4K series or the DP1200, DP1500, DP2000, DP3000 models.

Highlights

  • High-output 2200W xenon arc brightness for cinema screens
  • 2000-hour burst warranty rating for extended runtime
  • Precise 26.5V and 83A electrical specs ensure correct fit
  • 294mm length with 123mm LCL and 4mm cold arc gap
  • Compatible with Barco DP2K and DP4K projector series

Specifications

BrandJaspertronics
ModelDP-3000-2.2kW-LAMP
Part NumberDP-3000-2.2kW-LAMP
TypeProject Lamp
Weight6.0000

Questions about this item

How do I install the DP-3000-2.2kW-LAMP and what step is often done wrong?

Align the 4mm cold arc gap and 123mm LCL with the projector's anode and cathode contacts, then secure the 294mm lamp body; the step most often missed is verifying the 132mm cable reaches the ballast without tension.

What maintenance or replacement will the DP-3000-2.2kW-LAMP need later?

Plan to replace the lamp after 2000 hours of operation; the warranty sheet also references 1500 hours for standard use, so track runtime via the projector's hour counter and keep a spare DXL-22BAF (5002324) on hand.

What limit shows up first under sustained use of the DP-3000-2.2kW-LAMP?

The 2200W power rating at 26.5V and 83A is the primary limit; sustained operation at the upper end of the 15402200W range can accelerate electrode wear and reduce output before the 2000-hour mark.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.