Jaspertronics
Jaspertronics DLP Replacement Lamp SP50L2HX1X/RAD-LAMP
Original-specification DLP replacement lamp and housing for Samsung SP50L2HX1X/RAD TVs, supplied new with a 240-day warranty
- TypeProject Lamp
- Weight0.9990
- Direct-fit lamp and housing for Samsung SP50L2HX1X/RAD TV
- Original-specification bulb delivers full brightness and rated lifespan
- New condition ensures reliable out-of-the-box operation
- 240-day warranty period provides extended protection
- Lightweight assembly at .9990 kg simplifies installation
Compatible Samsung Model
The Jaspertronics SP50L2HX1X/RAD-LAMP is a new DLP replacement lamp and housing assembly built for the Samsung SP50L2HX1X/RAD television. It uses an original-specification bulb that delivers the manufacturer's rated brightness, clarity and full rated lifespan. This unit is intended for owners of that specific rear-projection set who need to restore the original light output. It will not fit other Samsung models or other brands.
240 Day Warranty Coverage
The lamp ships new and carries an industry-leading 240 day warranty period. Normal operation follows the thermal and power characteristics designed into the original Samsung light engine, so noise and power draw remain consistent with the TV's factory behaviour. No additional cooling or power modifications are required for standard use.
Direct Housing Installation
The assembly includes both lamp and housing, allowing a direct swap without reusing the old cage. At 0.9990 kg it matches the weight of the original module, so no bracket adjustments are needed. Buyers who require a bare bulb only or who own a different chassis will need a different part number.
Highlights
- Direct-fit lamp and housing for Samsung SP50L2HX1X/RAD TV
- Original-specification bulb delivers full brightness and rated lifespan
- New condition ensures reliable out-of-the-box operation
- 240-day warranty period provides extended protection
- Lightweight assembly at .9990 kg simplifies installation
Specifications
| Brand | Jaspertronics |
|---|---|
| Model | SP50L2HX1X/RAD-LAMP |
| Part Number | SP50L2HX1X/RAD-LAMP |
| Type | Project Lamp |
| Weight | 0.9990 |
Questions about this item
How do I install the SP50L2HX1X/RAD-LAMP in my Samsung SP50L2HX1X/RAD TV, and which step is most often missed?
Power off and unplug the TV, remove the lamp cover, unscrew the old assembly, slide the new Jaspertronics lamp and housing into place, tighten the screws, replace the cover, then reset the lamp timer in the service menu — skipping the timer reset is the step most people miss.
What maintenance or replacement will the SP50L2HX1X/RAD-LAMP need later?
The lamp itself is a consumable; when brightness drops or the TV signals end of life, replace the entire lamp and housing unit again — no separate filter or component service is required for this model.
What limit appears first during sustained use of the SP50L2HX1X/RAD-LAMP?
Lamp brightness gradually decreases over the rated lifespan; the 240-day warranty period covers early failure, but the first practical limit under continuous operation is the lamp's finite output life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



