We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics 69382 DLP replacement lamp module with bare E23H bulb inside housing

Jaspertronics

Jaspertronics 69382 132-150W 1.0 E23H dlp replacement lamp

SKU CH-Q8WT-GG490

A 132-150 Watt 1.0 E23H DLP replacement lamp weighing 0.5000 kg for various projectors and TVs

  • TypeProject Lamp
  • Weight0.5000
  • 132-150 W output powers compatible projectors and TVs
  • 0 E23H specification matches original equipment requirements
  • New condition ensures full rated performance from installation
  • 180 day coverage protects against early failure
  • 5000 kg weight simplifies handling during replacement

Direct replacement lamp

The Jaspertronics 69382 is a 132-150 watt 1.0 E23H DLP replacement lamp designed for various projectors and rear-projection TVs. It arrives new and installs directly into your existing cage assembly, restoring brightness without requiring a full housing swap. This unit suits owners of compatible displays who need a ready-to-fit light source. Buyers whose projectors use a different lamp code or connector type cannot use this model.

Verify cage code and wattage range

Before ordering, confirm that your device specifies a 132-150 watt 1.0 E23H lamp and that the original cage matches the 69382 part number. Cross-reference the service manual or the label on the old lamp to ensure the wattage range and connector keying align exactly. Installing a lamp outside the specified range can trigger error codes or prevent ignition. Units with proprietary cage designs not referenced by this part number are not compatible.

Typical thermal and power profile

In normal operation the lamp draws between 132 and 150 watts, so the projector’s cooling system must handle that continuous load. Fan noise will reflect the chassis design rather than the lamp itself, and surface temperatures on the cage remain within the limits set by the original manufacturer. The 180 day warranty period covers premature failure under standard viewing conditions. Power draw drops to zero instantly when the display enters standby.

Highlights

  • 132-150 W output powers compatible projectors and TVs
  • 0 E23H specification matches original equipment requirements
  • New condition ensures full rated performance from installation
  • 180 day coverage protects against early failure
  • 5000 kg weight simplifies handling during replacement

Specifications

BrandJaspertronics
Model69382
Part Number69382
TypeProject Lamp
Weight0.5000

Questions about this item

Does the Jaspertronics 69382 lamp ship with a housing or cage, or must I reuse my old one?

The lamp is designed to fit into your existing cage assembly, so you will need to keep and reuse the original housing.

How do I know whether my projector needs the 132 W or the 150 W setting of this 1.0 E23H lamp?

Check your projector’s service manual or the label on the original lamp; the correct wattage is specified by the manufacturer for each model.

What brightness drop should I expect after the 180-day period quoted for the Jaspertronics 69382?

The 180-day figure is the warranty term, not a rated half-life; actual light output decline depends on usage hours and projector cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.