We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular USB-C KVM switch with two ports and a short cable

Jansicotek

Jansicotek USB-C Bi-Direction KVM Switch 2 Ports 8K@30Hz 4K@120Hz 10Gbps 100W PD Black

SKU CH-CCAW-86Y5Z

A bi-directional USB-C switch that shares one display between two computers or toggles one source across two monitors at up to 8K@30Hz or 4K@120Hz with 10Gbps data and 100W power delivery

  • Ports2
  • Input Connector1 x Type-C
  • Output Connector2 x Type-C
  • Maximum Resolutions8K@30Hz 4K@120Hz
  • BandwidthHigh Speed 10Gbps
  • Package Contents1 x Bi-direction Switch 50cm
  • Switch two computers to one 8K display
  • Split one source across two USB-C monitors
  • Deliver up to 100W power while switching
  • Transfer data at 10Gbps USB 3.1 speed
  • Compliant with USB 3.1 and DisplayPort 1.4

Two-port bi-directional USB-C KVM

This USB-C switch connects two computers to one display or one computer to two displays, switching manually between them. Both source and display ports must support DisplayPort Alternate Mode for video. The unit includes a 50 cm cable and requires standard USB-C Gen 2 cables for full performance.

Thermals noise and power draw

Passive operation means no fans and silent running in normal use. The switch handles up to 100 W of USB Power Delivery 3.0 pass-through so a connected laptop can charge while working. Data traffic runs at 10 Gbps USB 3.1 Gen 2 speeds without active cooling.

Sustained load behaviour

Video bandwidth supports 8K at 30 Hz or 4K at 120 Hz continuously, with lower resolutions such as 1440p at 165 Hz also available. Total cable length across both ends should stay under three metres to avoid flicker or signal loss during extended sessions. Two displays cannot operate simultaneously.

Highlights

  • Switch two computers to one 8K display
  • Split one source across two USB-C monitors
  • Deliver up to 100W power while switching
  • Transfer data at 10Gbps USB 3.1 speed
  • Compliant with USB 3.1 and DisplayPort 1.4

Specifications

Ports2
Input Connector1 x Type-C
Output Connector2 x Type-C
Maximum Resolutions8K@30Hz 4K@120Hz
BandwidthHigh Speed 10Gbps
Package Contents1 x Bi-direction Switch 50cm

Questions about this item

How do I connect the Jansicotek USB-C Bi-Direction KVM Switch so the 8K@30Hz video signal works?

Connect each device with a standard USB-C Gen-2 cable, keep the total cable length under 3 metres, and ensure every USB-C port involved supports DP Alternate Mode or the video will not appear.

What part of this switch is most likely to need replacement first?

The 50 cm integrated cable is the only moving part; repeated bending or unplugging can fatigue its internal wires and cause intermittent 10 Gbps data or 100 W power delivery.

At what point does the 10 Gbps bandwidth limit appear during a large file transfer?

The 10 Gbps ceiling is reached whenever combined video and data traffic exceeds that rate, so sustained copies to a fast SSD will throttle to the switch’s maximum throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.