We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 active extension cable 100 feet A male to A female with signal booster chip and power adapter

Jansicotek

Jansicotek U310 USB 3.0 Active Extension Cable 100 Feet A-Male to A-Female

SKU CH-CFWC-0RTS6

Active USB 3.0 extension cable reaches 100 feet with built-in signal booster chips and included 5V power adapter for stable 5 Gbps data transfer

  • TypeUSB 3.0
  • Connector TypeUSB A to USB A
  • ColorBlack
  • Terminal GenderMale to Female
  • Speed5 Gbps
  • SpecificationsConnector 1: USB 3.0 Type A Male Connector 2: USB 3.0 Type A

Cable Length 100 Feet

  • 5 Gbps transfer speed for fast backups
  • 100 feet reach with built-in signal booster
  • Works with VR headsets, consoles and peripherals
  • No driver needed on Windows, Mac, Linux or Chrome OS
  • Includes 5V power adapter for high-draw devices

Jansicotek U310 100 ft USB 3.0 active extension

This active USB 3.0 extension cable spans 100 feet between a host and a peripheral while preserving SuperSpeed data rates. A built-in signal booster chip compensates for attenuation that normally limits passive copper runs. The male-to-female Type-A connectors fit standard ports on PCs, Macs, Linux boxes and Chrome OS devices without driver installation.

Replaces passive cables that fail beyond 5 meters

Passive USB 3.0 cables lose signal integrity past roughly 5 metres, forcing users to place devices near the computer. This active design adds a 5 V 2 A power adapter so the booster chip can maintain 5 Gbps throughput at the full 100-foot length. The upgrade is worth it whenever a sensor, camera or headset must operate in another room or across a studio floor.

Handles cameras, headsets.

The cable comfortably carries 5 Gbps traffic from VR headsets, webcams, external drives, printers and multi-port hubs. Peripherals drawing more than 900 mA require the included AC adapter to avoid voltage drop. Very long runs with multiple high-current devices may exceed the booster’s headroom, so total bus load should stay within the adapter’s 2 A rating.

Highlights

  • 5 Gbps transfer speed for fast backups
  • 100 feet reach with built-in signal booster
  • Works with VR headsets, consoles and peripherals
  • No driver needed on Windows, Mac, Linux or Chrome OS
  • Includes 5V power adapter for high-draw devices

Specifications

BrandJansicotek
ModelU310
TypeUSB 3.0
Connector TypeUSB A to USB A
ColorBlack
Terminal GenderMale to Female
Speed5 Gbps
SpecificationsConnector 1: USB 3.0 Type A Male
Connector 2: USB 3.0 Type A Female
Cable Rating: SuperSpeed USB 3.0 up to 5 Gbps data transfer rate
Built-in A Signal Booster Smart Chip
FeaturesThe data transfer speed of USB 3.0 extension cable is up to 5Gbit/s, which is approximately ten times that of USB 2.0 (480Mbit/s). It can quickly transfer and backup large files, high-definition movies, music, or files, saving data transfer time.
The USB3.0 expansion cable is very suitable for remote expansion of USB signals. You can expand the device to more convenient locations, with a built-in signal amplification chip to ensure no signal attenuation and uninterrupted data transmission.
The USB3.0 expansion cable adopts a multi-layer shielding structure to minimize interference.
T

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 100-foot cable need a wall outlet for the included 5V/2A power adapter?

Yes, the built-in signal booster chips require the AC adapter when connected peripherals draw more than 900 mA to maintain 5 Gbps speeds over the full length.

Do I install the booster end at the computer or at the device?

Connect the male plug into the host port and the female port to your peripheral; the amplification chip sits near the device end so the signal is boosted after the long run.

Will the gold-plated connectors or foil-and-braid shielding degrade and need replacement?

The connectors and shielding are passive and rated for the cable's lifetime; only the external 5V/2A power adapter may need replacing if it fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.