Jansicotek
Jansicotek SATA to USB 3.0 adapter cable 22-pin with 12V 2A power adapter
Connects 2.5 or 3.5 inch SATA drives via USB 3.0 at up to 5 Gbps with included 12V 2A power adapter
- ColorBlack
- Connect any 2.5 or 3.5 inch SATA drive via USB 3.0
- Transfer data up to 5 Gbps with UASP support
- 12V 2A power adapter powers both drive sizes
- Plug and play with hot-swap on Windows, Mac and PS4
- 22-pin SATA III connector complies with SATA 2.0 standards
Connect any 2.5 or 3.5 inch SATA drive
This adapter cable turns a standard 2.5 or 3.5 inch SATA HDD or SSD into an external USB 3.0 drive. It connects via a 22-pin SATA interface and includes a 12V 2A power adapter for reliable operation with larger desktop drives. The device is plug-and-play and supports hot-swapping for quick drive changes.
Sustained transfer with UASP support
The adapter delivers up to 5 Gbps over USB 3.0 and supports UASP technology. UASP reduces processor overhead by 80 percent and can move data 70 percent faster than traditional USB 3.0 bulk endpoints when the host controller also supports UASP. This helps maintain throughput during long copy or backup sessions.
Low noise with external power
The unit has no fan and draws power from the included 12V 2A adapter, so it adds no audible noise beyond the connected drive itself. The external supply ensures stable voltage for 3.5 inch drives that cannot run on bus power alone. Power consumption scales with the attached drive rather than the adapter.
Highlights
- Connect any 2.5 or 3.5 inch SATA drive via USB 3.0
- Transfer data up to 5 Gbps with UASP support
- 12V 2A power adapter powers both drive sizes
- Plug and play with hot-swap on Windows, Mac and PS4
- 22-pin SATA III connector complies with SATA 2.0 standards
Specifications
| Color | Black |
|---|
Questions about this item
How much power does the 12V 2A adapter draw when a 3.5 inch drive runs all day?
The included 12V 2A power adapter provides the extra current a 3.5 inch SATA drive needs for continuous operation; the adapter connects to the cable's DC-Jack port.
Which host port and drive sizes must I already have to use this cable?
You need a USB 3.0, 2.0 or 1.1 port on the host and a 2.5 inch or 3.5 inch SATA HDD or SSD with a 22-pin connector; the 12V 2A adapter is required for 3.5 inch drives.
Will UASP acceleration work with my older USB 2.0 laptop and SATA 1.5 Gbps drive?
UASP requires a UASP-enabled host controller; the adapter falls back to standard USB 2.0 or 1.1 speeds and remains compatible with SATA 1.5 Gbps drives.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
