We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA cables, each 18 inches with one straight and one right-angle locking connector

Jansicotek

Jansicotek SATA Cable III 90 Degree 3 Pack 6Gbps Straight to Right 18 Inch Locking Latch

SKU CH-8V05-FNKCM

Three SATA III cables with 90-degree and straight locking connectors support 6 Gbps data transfer for drives and optical devices

  • ColorBlack
  • 6 Gbps data rate from SATA 3.0 spec
  • 90-degree right-angle connector saves space in tight cases
  • Locking latch on each end prevents accidental disconnects
  • 18-inch length fits standard drive-to-motherboard runs
  • Three cables in one pack gives spares for RAID or upgrades

Three-pack SATA III data cables

This three-pack supplies straight-to-right-angle SATA III cables for connecting internal hard drives, SSDs and optical drives to motherboards or host controllers. Each cable measures 18 inches and carries a locking latch on both ends for a secure fit. The pack suits builders adding multiple drives or keeping spares for quick replacements.

6 Gbps bandwidth with legacy support

Rated for SATA revision 3.0, the cables handle up to 6 Gbps while remaining compatible with older SATA I and II devices. Actual throughput depends on the connected drive and controller, so very fast SSDs may hit the interface ceiling. The 90-degree connector eases routing in tight chassis, but the fixed length limits reach in larger cases.

Locking latches and three-unit value

Every cable ends in a latch that resists vibration and accidental unplugging during transport or upgrades. The three-pack format lowers per-cable cost and provides immediate spares for RAID arrays or multi-drive setups. No power conductors are included, so a separate SATA power cable from the PSU remains necessary.

Highlights

  • 6 Gbps data rate from SATA 3.0 spec
  • 90-degree right-angle connector saves space in tight cases
  • Locking latch on each end prevents accidental disconnects
  • 18-inch length fits standard drive-to-motherboard runs
  • Three cables in one pack gives spares for RAID or upgrades

Specifications

ColorBlack

Questions about this item

Will these 6 Gbps cables run at full speed with my older SATA I and SATA II drives?

Yes, the SATA Revision 3.0 cables are backwards compatible with SATA I and SATA II drives, though the actual transfer rate will be limited by the drive's own rating.

How can I verify the locking latch is engaged after I plug the cable into my motherboard and SSD?

Push each connector until you feel a distinct click; the latch will then resist a gentle pull, confirming a secure connection that resists vibration.

The pack contains three 18 inch straight-to-right-angle data cables — do I need to buy separate power cables for my drives?

Yes, these are data-only cables; each drive still requires a separate SATA power connection from your power supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.