Jansicotek
Jansicotek OZHW2 Gigabit Ethernet Splitter 1 to 3 RJ45 USB Powered
USB-powered Gigabit splitter turns one RJ45 port into three simultaneous 1000 Mbps connections for Cat5-to-Cat8 cables
- TypeEthernet Splitter 1 to 3 RJ45 Network Adapter
- Changer TypeGigabit RJ45 Ethernet Splitter 1 to 3
- SpecificationsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped
- Connector StyleRJ45
- FeaturesExpand your network and add network devices with this 3-port
- Dimensions4.02 x 3.74 x 1.06 inches
- Connect three devices from one Ethernet port with gigabit speed
- USB-powered operation via included 80 cm cable for stable performance
- Plug-and-play setup requires no software or IP configuration
- Compatible with Cat5 through Cat8 cables and common network devices
- Compact 4.02 × 3.74 × 1.06 inch aluminium housing weighs 3.2 ounces
Jansicotek OZHW2 1-to-3 RJ45 Splitter
The Jansicotek OZHW2 is a Gigabit Ethernet splitter that turns a single RJ45 socket into three female ports. It lets three devices such as computers, TVs or set-top boxes share one wired connection simultaneously. The adapter requires the included USB power cable to operate and cannot function without it. It is intended for users who need extra ports where cabling is limited.
Gigabit shared bandwidth and cabling limits
Each of the three ports can carry up to 1000 Mbps, but the total throughput is shared across all active devices. The splitter works with Cat5, Cat5e, Cat6, Cat7 and Cat8 cables and passes signals through a pure physical connection without assigning IP addresses. IPTV signals are not supported and crosstalk between ports is minimised by the internal circuit design.
USB-powered plug-and-play installation
Setup is plug-and-play: connect the upstream Ethernet cable, attach the USB cable to a power source, then plug in up to three devices. The 80 cm USB cable must reach a stable power socket or the splitter will not work. A common issue is forgetting to supply power, which leaves all three ports inactive. No driver or software configuration is required.
Highlights
- Connect three devices from one Ethernet port with gigabit speed
- USB-powered operation via included 80 cm cable for stable performance
- Plug-and-play setup requires no software or IP configuration
- Compatible with Cat5 through Cat8 cables and common network devices
- Compact 4.02 × 3.74 × 1.06 inch aluminium housing weighs 3.2 ounces
Specifications
| Brand | Jansicotek |
|---|---|
| Model | OZHW2 |
| Type | Ethernet Splitter 1 to 3 RJ45 Network Adapter |
| Changer Type | Gigabit RJ45 Ethernet Splitter 1 to 3 |
| Specifications | Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection. Ethernet Splitter 1 to 3: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously. 1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 3 ways dua |
| Connector Style | RJ45 |
| Features | Expand your network and add network devices with this 3-port 1000mbps router/ rj45 network switch splitter, letting you transfer 10 times faster than Fast Ethernet. Three ports offer 2X Ethernet so you can plug and play without missing a beat. 3-port Gigabit Ethernet Splitter: Provides a wired network connection for 2 devices simultaneously by means of one single Ethernet line. 10/100/1000 Mbps speed: Ethernet Lan splitter high speed for efficient performance. Superior Construction for Reliability and Safety: Metal shell, hard and wear-resistant, heat-resistant, flame-resistant; Copp |
| Dimensions | 4.02 x 3.74 x 1.06 inches |
| Weight | 3.2 ounces |
| Package Contents | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Questions about this item
Which version of the Jansicotek OZHW2 splitter should I choose for three devices?
This single model provides one RJ45 input and three RJ45 outputs, so it is the only version needed to connect three devices simultaneously.
What does the 1000 Mbps figure mean when the splitter is in use?
Each of the three cable sets can carry up to 1000 Mbps, and the total bandwidth is shared among the connected devices.
What interface does the splitter use and what does it cap in practice?
It uses RJ45 8P8C connectors compatible with Cat5 through Cat8 cables, and the USB power requirement caps operation to locations with a USB power source.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
