Jansicotek
Jansicotek OZF8K2 1×3 HDMI Splitter 8K@60Hz 4K@120Hz audio
Duplicates one HDMI source to three displays at up to 8K 60 Hz or 4K 120 Hz with HDCP 2.3 and EDID management
- TypeHDMI Splitters
- Changer TypeHDMI
- Ports3
- AudioYes
- ColorBlack
- SpecificationsHDMI 2.1 Splitter 1 in 3 out Input Video Signal:0.5-1.0 Volt
- Mirrors one source to three displays simultaneously via HDMI 2.1 1×3 splitter
- Delivers 8K resolution at 60 Hz with 48 Gbps bandwidth for crystal-clear picture
- Supports 4K gaming at 120 Hz and 1080p at 240 Hz for smooth, lag-free action
- Smart EDID management and down-scaler ensure compatibility across varied TVs and monitors
- Transmits signal up to 26 ft total with included 5 V DC power adapter
Splitter for three simultaneous displays
The Jansicotek OZF8K2 duplicates a single HDMI source across three screens at once. It accepts 8K at 60 Hz and 4K at 120 Hz input, then mirrors that signal to every connected display. The unit is aimed at installers and home users who need identical content on multiple TVs or projectors without running separate source devices. No software setup is required; power it and connect the cables.
Sustained 48 Gbps bandwidth with EDID management
Rated for 48 Gbps throughput, the splitter maintains full HDMI 2.1 bandwidth during continuous operation rather than only in short bursts. Smart EDID management negotiates capabilities with each sink so the source sees a single, compatible display profile. A built-in down-scaler allows mixed-resolution sinks to each receive their highest supported format without forcing the whole chain to the lowest common denominator. HDCP 2.3 and earlier versions pass through transparently.
Fanless aluminium enclosure runs silent
The aluminium alloy housing dissipates heat passively, so the device adds no audible noise to a living-room or meeting-room setup. Power draw is limited to the included DC 5 V adapter, keeping cabling simple and avoiding the need for a high-wattage supply. Input cables up to 16 ft and output cables up to 10 ft are supported for a total run of 26 ft without signal degradation. The compact 5.59 by 3.15 by 1.26 inch form factor fits behind most displays.
Highlights
- Mirrors one source to three displays simultaneously via HDMI 2.1 1×3 splitter
- Delivers 8K resolution at 60 Hz with 48 Gbps bandwidth for crystal-clear picture
- Supports 4K gaming at 120 Hz and 1080p at 240 Hz for smooth, lag-free action
- Smart EDID management and down-scaler ensure compatibility across varied TVs and monitors
- Transmits signal up to 26 ft total with included 5 V DC power adapter
Specifications
| Brand | Jansicotek |
|---|---|
| Series | OZF8K2 |
| Model | OZF8K2 |
| Part Number | OZF8K2 |
| Type | HDMI Splitters |
| Changer Type | HDMI |
| Ports | 3 |
| Audio | Yes |
| Color | Black |
| Specifications | HDMI 2.1 Splitter 1 in 3 out Input Video Signal:0.5-1.0 Volts P-P Input DDC Signal:5 Volts P-P (TTL) Max Single Link Range:8K/ 60Hz Output Video:HDMI 2.1 + HDCP 2.3/1.1/1.2/1.3/1.4/2.0/2.2 Resolutions DTV/HDTV:480P/576i/576P/720P/1080i/2160P/4320P HDMI Version:HDMI 2.1 EDID Duration:4 seconds Power Supply:5V/2A Frequency Bandwidth:48Gbps Deep color:30 bit, 36 bit, 48 bit per pixel Digital Audio Format:DTS-HD/ Dolby Atmos/ Dolby true HD/Digital 7.1CH/ LPCM 7.1/ DTS/ Dolby AC3/ DSD/ DTS:X |
| Input Connector | 1 HDMI |
| Output Connector | 3 HDMI |
| Maximum Resolutions | 8K@60Hz |
| Bandwidth | 48Gps |
| Features | HDMI 2.1 Splitter 8K@60Hz, HDMI Splitter 1 in 3 Out 4K@120Hz Plug and play, no software required, easy to access. Transfer HDMI input output signal up to 26ft (Input 16 ft and output 10ft ). Smart EDID management: EDID HDMI Splitter provides 4 switching modes that can be meet for different resolution needs. With flexible EDID switching you can set the desired output signal for your video sources to improve compatibility with your display or projector and works stability. HDMI Input compatible with any HDMI device: such as PS4/ Roku/ Fire TV/ Blu-ray players/ PS4 Pro/ PS3/ Beamer/ Lap |
| Dimensions | 5.59 x 3.15 x 1.26 inches |
| Weight | 3.2 ounces |
| Package Quantity | 1 |
| Package Contents | 8K HDMI Splitter*1, DC5V Power Adapter*1, User Manual*1 |
Questions about this item
Does the OZF8K2 get hot or draw much power when it runs all day?
The aluminium housing acts as a passive heatsink and the unit is powered by the included 5 V DC adapter, so it stays cool and draws minimal power during continuous use.
What cables or sources must I already have to use the three HDMI outputs?
You need one HDMI source such as a PS5, Xbox Series X, Blu-ray player or PC and up to three HDMI cables to reach your TVs, monitors or projectors.
Will my older 1080p or 4K@60Hz displays work alongside an 8K screen on this splitter?
Yes, the built-in EDID management and down-scaler let each output negotiate its own maximum resolution, so legacy 1080p or 4K@60Hz displays operate correctly beside an 8K@60Hz panel.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115009BTC
In stock
