We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular HDMI splitter with three ports

Jansicotek

Jansicotek OZF10 4K@60Hz HDMI Splitter 1 in 2 Out

SKU CH-0KBG-26GGR

Duplicates a single HDMI source to two screens at 4K 60Hz with 10.5Gbps bandwidth, HDCP 1.4, and 7.1 audio

  • TypeHDMI Splitters
  • Changer TypeHDMI
  • Ports2
  • AudioYes
  • ColorBlack
  • Specifications4K@60Hz HDMI Splitter 1 in 2 out One HDMI input to Two HDMI
  • Mirror one source to two displays without signal loss
  • 4K at 60 Hz with 10.5 Gbps bandwidth for sharp detail
  • Supports DTS-HD, Dolby TrueHD and LPCM 7.1 audio
  • HDCP 1.4 and HDMI 2.0 compliant for protected content
  • 1080p signals reach 26 ft, 4K signals reach 16 ft

Jansicotek OZF10 4K HDMI Splitter

The Jansicotek OZF10 splits one HDMI source across two displays at up to 4K 60 Hz. It duplicates video and audio simultaneously with support for HDCP 1.4, HDMI 2.0 and YUV 4:2:0 colour sampling. Deep colour up to 12 bit is handled alongside digital audio formats such as DTS-HD, Dolby TrueHD and LPCM 7.1. The unit requires no software and is powered via the included USB cable.

Check source resolution and cable lengths

Verify that your source device can output 3840 x 2160 at 60 Hz if you need the maximum refresh rate. Both connected displays must accept the same resolution because the splitter mirrors the signal and does not support extended desktop modes. With standard AWG26 cables the input and output runs can reach 26 ft at 1080p or below, but only 16 ft at 4K. Ensure the USB power cable can reach a suitable port or adapter.

Ideal for mirrored 4K setups.

This splitter suits installers who need identical 4K 60 Hz content on two screens such as digital signage, dual-room viewing or projector plus monitor configurations. It also serves gamers or streamers sending one console signal to a capture card and a TV simultaneously. Buyers who want independent desktops, different resolutions per screen, or extended desktop functionality should look at a video matrix or a graphics card with multiple outputs instead.

Highlights

  • Mirror one source to two displays without signal loss
  • 4K at 60 Hz with 10.5 Gbps bandwidth for sharp detail
  • Supports DTS-HD, Dolby TrueHD and LPCM 7.1 audio
  • HDCP 1.4 and HDMI 2.0 compliant for protected content
  • 1080p signals reach 26 ft, 4K signals reach 16 ft

Specifications

BrandJansicotek
SeriesOZF10
ModelOZF10
Part NumberOZF10
TypeHDMI Splitters
Changer TypeHDMI
Ports2
AudioYes
ColorBlack
Specifications4K@60Hz HDMI Splitter 1 in 2 out
One HDMI input to Two HDMI Outputs
Support HDCP1.4, HDMI2.0, YUV 4:2:0.
Supports Ultra HD 4Kx2K (4K@60HZ/ 30HZ) 1080P/ 1080i, 720p/ 720i, 480p/ 480i; Deep color 8bit,10bit, 12bit.
Support digital audio formats including DTS-HD, Dobly-true HD, LPCM 7.1, DTS, Dobly-AC3, DSD, HD(HBR)
With the AWG26 (19+1) HDMI standard cable: When the resolution is 1080P or below, input and output up to 26ft (8m); When the resolution is 4K, input and output up to 16ft (5m).
PAY ATTENTION: NO support Extended Mode.
Input Connector1 HDMI
Output Connector2 HDMI
Maximum Resolutions3840 x 2160
Bandwidth10.5Gbps
FeaturesSupport HDCP1.4, HDMI2.0, YUV 4:2:0.
Supports Ultra HD 4Kx2K (4K@60HZ/ 30HZ) 1080P/ 1080i, 720p/ 720i, 480p/ 480i; Deep color 8bit,10bit, 12bit.
Support digital audio formats including DTS-HD, Dobly-true HD, LPCM 7.1, DTS, Dobly-AC3, DSD, HD(HBR)
With the AWG26 (19+1) HDMI standard cable: When the resolution is 1080P or below, input and output up to 26ft (8m); When the resolution is 4K, input and output up to 16ft (5m).
Dimensions5.59 x 3.15 x 1.26 inches
Weight3.2 ounces
Package Quantity1
Package Contents1 x 4K@60Hz HDMI splitter 1 in 2 out
1 x USB cable
1 x User Manual

Questions about this item

What cables and accessories come with the Jansicotek OZF10 splitter, and do I need to buy HDMI cables separately?

The box includes the splitter, a USB cable and a user manual. You must supply your own HDMI cables for the one input and two outputs.

How do I choose between the 4K@60Hz and lower-resolution modes listed for the OZF10?

The splitter automatically matches the highest resolution both connected displays support, up to 3840 x 2160 at 60Hz. If either display is limited to 1080p or 720p, the signal drops to that common resolution.

What does the 10.5Gbps bandwidth figure mean when I connect two 4K screens to the OZF10?

It allows full 4K@60Hz 8-bit, 10-bit or 12-bit colour with HDCP1.4 on both outputs simultaneously, provided you use AWG26 cables no longer than 16ft (5m) for 4K or 26ft (8m) for 1080p.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.