We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek OZC9 4K60 HDMI 2.0 USB 3.0 video capturing device

SKU CH-WDPP-XS55F

Captures 4K@60Hz HDMI video via USB 3.0 with 1080p60 recording, loop-out, RJ45 Ethernet and 3.5 mm mic/headphone ports

  • InterfaceUSB 3.0/USB-C
  • Resolution Support4K@60Hz
  • Camera ResolutionUp to 4K Video
  • ColorBlack
  • HDMI1 Input/1 Output
  • USB Port1
  • Capture 4K video at 60 Hz via HDMI 2.0 input
  • Record gameplay up to 1080p 60 fps with USB 3.0 low latency
  • Connect microphone and headphones through 3.5 mm audio ports
  • Plug-and-play on Windows, Mac, Linux and Android without drivers
  • Wired 1000 M RJ45 Ethernet replaces unstable Wi-Fi for streaming

Jansicotek OZC9 4K60 capture device

The Jansicotek OZC9 captures HDMI sources at up to 4K@60Hz and records at 1080p 60fps over USB 3.0 or USB-C. It is built for streamers, gamers and content creators who need a portable capture solution for consoles, cameras or PCs. Plug-and-play operation means no driver installation is required on Windows, Mac, Linux or Android.

Thermals noise and power

The aluminium alloy body passively dissipates heat without a fan, so the unit runs silently during long sessions. Power is drawn entirely from the host USB 3.0 port, eliminating the need for an external adapter. Typical capture latency is imperceptible thanks to the high-speed USB 3.0 link and HDMI 2.0 passthrough.

Deciding specification

The single specification that determines fit is the 1080p 60fps capture ceiling despite a 4K@60Hz passthrough. Buyers who need recorded or streamed footage at 4K resolution should look elsewhere.

Highlights

  • Capture 4K video at 60 Hz via HDMI 2.0 input
  • Record gameplay up to 1080p 60 fps with USB 3.0 low latency
  • Connect microphone and headphones through 3.5 mm audio ports
  • Plug-and-play on Windows, Mac, Linux and Android without drivers
  • Wired 1000 M RJ45 Ethernet replaces unstable Wi-Fi for streaming

Specifications

BrandJansicotek
SeriesOZC9
ModelOZC9
InterfaceUSB 3.0/USB-C
Resolution Support4K@60Hz
Camera ResolutionUp to 4K Video
ColorBlack
HDMI1 Input/1 Output
USB Port1
CompatibilityTwitch,Youtube,Facebook,Twitter,TikTok,OBS,Potplayer,VLC and Vmix and so on.
System RequirementsSuitable for Windows and Mac OS Linux,Android or later
Option4K

Questions about this item

How do I install the OZC9 capture card and what step is often missed?

Connect the HDMI source to the HDMI 2.0 input, link the HDMI 1.4 loop-out to a display, plug the USB 3.0 cable into the computer, and connect a microphone to the 3.5 mm input and headphones to the 3.5 mm output; the step often missed is enabling the microphone in the streaming software so commentary is recorded.

What maintenance or replacement will the OZC9 need later?

The device has no internal battery or fan; only the supplied HDMI and USB 3.0/USB-C cables may wear out and need replacement after extended use.

What limit appears first during sustained 4K capture with the OZC9?

The capture resolution is limited to 1080p at 60 fps, so even though the HDMI 2.0 input and 1.4 loop-out pass 4K at 60 Hz, the recorded stream cannot exceed 1080p.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.