We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular capture card with HDMI ports and USB 3.0 cable

Jansicotek

Jansicotek OZC4 video capturing device 4K 1080p 60fps USB 3.0

SKU CH-E267-FNQF5

Captures HDMI video up to 4K input and 1080p output at 60 fps via USB 3.0 with loop-out and mic-in

  • InterfaceUSB 3.0
  • Resolution Support4K
  • Camera ResolutionUp to 4K Video
  • ColorBlack
  • HDMI1 Input/1 Output
  • USB Port1
  • Capture 4K input signals with high-speed USB 3.0 technology
  • Record smooth 1080p60 gameplay without driver installation
  • Loop HDMI output to a monitor for zero-latency passthrough
  • Connect microphone directly for live commentary while streaming
  • Use 15-metre AWG26 cables for flexible device placement

What the Jansicotek OZC4 does

The Jansicotek OZC4 is a USB 3.0 video capture device that accepts an HDMI signal up to 4K at 30 Hz and delivers up to 1080p at 60 fps to a host computer. It is aimed at streamers and content creators who need to record or broadcast gameplay from consoles such as PS4 or Xbox One, or video from cameras and set-top boxes, without installing drivers.

Installation experience

The device uses a true plug-and-play design with no driver installation required on Windows, Linux, Mac OS or Android; once connected via USB 3.0 it is recognised automatically and the input is detected and adjusted. A single HDMI cable up to 15 metres long using AWG26 standard wiring can be used for 1080p and lower resolutions. The only common issue is ensuring the source device outputs a compatible resolution and refresh rate so that the capture software receives a stable signal.

Limits of the USB 3.0 capture path

The HDMI input supports a maximum of 4K at 30 Hz, while the USB output tops out at 1080p at 60 fps, so 4K 60 fps sources cannot be captured at their native frame rate. The loop-out HDMI port passes the original signal through for local monitoring but does not upscale or convert the image. Bandwidth is limited to the USB 3.0 interface, and the unit draws power solely from that connection, so very long cables or unpowered hubs may reduce reliability.

Highlights

  • Capture 4K input signals with high-speed USB 3.0 technology
  • Record smooth 1080p60 gameplay without driver installation
  • Loop HDMI output to a monitor for zero-latency passthrough
  • Connect microphone directly for live commentary while streaming
  • Use 15-metre AWG26 cables for flexible device placement

Specifications

BrandJansicotek
SeriesOZC4
ModelOZC4
InterfaceUSB 3.0
Resolution Support4K
Camera ResolutionUp to 4K Video
ColorBlack
HDMI1 Input/1 Output
USB Port1
Option4K

Questions about this item

How can I confirm the Jansicotek OZC4 is capturing at 1080p 60fps after I plug it in?

Open your streaming software such as OBS or VLC, check the video properties and verify the active resolution shows 1080p at 60 frames per second while the HDMI loop-out remains active on your display.

What cables and accessories are included with the Jansicotek OZC4 and what must I provide myself?

The box contains the capture unit with one HDMI input, one HDMI output and a USB 3.0 connection; you will need to supply your own HDMI cables — up to 15 metres AWG26 for 1080p sources — and a microphone if you want commentary audio.

Which version of the Jansicotek OZC4 should I choose for 4K input but 1080p 60fps recording?

Select the 4K option; it accepts HDMI input up to 4K at 30Hz and delivers a USB output maximum of 1080p at 60fps, matching the stated input and output limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.