We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black aluminium box with HDMI in and out, USB 3.2 port and 3.5 mm audio jacks

Jansicotek

Jansicotek OZC10 4K60 USB 3.2 HDMI video capturing device

SKU CH-0MQT-K5B70

Captures 4K 60fps HDMI video with 1080p 240Hz or 1440p 144Hz pass-through, 3.5mm audio I/O and ultra-low latency over USB 3.2

  • InterfaceUSB 3.2
  • Resolution Support4K
  • Camera ResolutionUp to 4K Video
  • ColorBlack
  • HDMI1 Input/1 Output
  • USB Port1
  • Capture 4K 60 fps gameplay with USB 3.2 speed
  • Loop-out passes 4K 60 Hz HDR to your display
  • Record 1080p 240 Hz or 1440p 144 Hz high-frame-rate sources
  • 5 mm mic in and headphone out for live commentary
  • Plug-and-play with OBS on PC or Mac

Jansicotek OZC10 4K60 USB 3.2 capture

The Jansicotek OZC10 is a USB 3.2 video capturing device that accepts a 4K HDMI source and passes it through at 4K 60 Hz while recording. It suits streamers, gamers and conferencing users who need simultaneous capture and loop-out on PC or Mac. A 3.5 mm microphone input and headphone output let you mix live commentary with game audio in one take.

Install in seconds, watch for HDCP

Plug the box into a USB 3.2 port, connect the source to the HDMI input and the display to the HDMI output; no driver installation is required for OBS and similar software. The aluminium enclosure runs warm under sustained 4K 60 Hz loads, so keep ventilation clear. HDCP-protected content from consoles or media players will block the signal, and the single USB 3.2 link cannot sustain 4K capture if the host port negotiates at USB 2.0 speeds.

For single-source 4K 60 Hz workflows

Creators recording one HDMI device at 4K 60 Hz with live commentary will find the pass-through and audio mixing convenient. Builders who need multi-camera switching, internal PCIe capture, 4K capture above 60 Hz or 8K resolution should look at something else. The single USB 3.2 connection also limits users whose laptops lack a full-bandwidth USB 3.2 Type-A or Type-C port.

Highlights

  • Capture 4K 60 fps gameplay with USB 3.2 speed
  • Loop-out passes 4K 60 Hz HDR to your display
  • Record 1080p 240 Hz or 1440p 144 Hz high-frame-rate sources
  • 5 mm mic in and headphone out for live commentary
  • Plug-and-play with OBS on PC or Mac

Specifications

BrandJansicotek
SeriesOZC10
ModelOZC10
InterfaceUSB 3.2
Resolution Support4K
Camera ResolutionUp to 4K Video
ColorBlack
HDMI1 Input/1 Output
USB Port1
Option4K

Questions about this item

How can I confirm the OZC10 is capturing 4K60 video correctly after connecting it?

Open your recording software and verify the preview shows 4K at 60 fps with HDR 12-bit colour depth; the HDMI 2.0 loop-out should simultaneously pass 4K60 HDR or 1080P 240Hz to your display without visible latency.

What cables and accessories are included with the OZC10, and what must I provide?

The box contains the capture unit with HDMI input, HDMI output, USB 3.2 port and 3.5 mm audio in/out jacks; you must supply an HDMI 2.0 cable for the source, a second HDMI cable for the pass-through display, and a USB 3.2 cable to the host.

The listing mentions a single OZC10 model — are there different capacity or version options to choose from?

Only the OZC10 series is offered; it captures up to 4K60, passes through 1440P 144Hz or 1080P 240Hz, supports HDR and VRR, and includes 3.5 mm audio I/O — no alternate capacities or versions exist.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.