Jansicotek
Jansicotek KW650 6V 12V 100-2000 CCA Battery Tester electronic
Tests 6V and 12V batteries from 100 to 2200 CCA with 99.5% accuracy, analyses starter and alternator systems, and shows health, charge and replacement guidance on a colour screen
- FeaturesKW650 Battery Load Tester Key Features 1. Strong Capacity: W
- Height7.13 inch
- Width6.02 inch
- Length2.17 inch
- Weight1.2 pounds
- FitmentKONNWEI KW650 6V 12V Car Battery Tester, 100-2000 CCA Batter
- Tests 6V and 12V batteries from 100 to 2000 CCA
- Supports flooded, AGM flat plate, AGM spiral and gel types
- Colour screen enables in-vehicle and out-of-vehicle testing
- Measures SOH, SOC, CCA value, voltage and internal resistance
- Polarity reverse protection with reminder light included
Automotive Battery Analyser
The Jansicotek KW650 tests 6V and 12V lead-acid batteries rated from 100 to 2000 CCA. It covers regular flooded, AGM flat plate, AGM spiral and gel types. The unit works in-vehicle or on the bench without removing the battery. It is aimed at DIY owners and professional technicians who need quick health and charge-state readings.
Upgrade from Basic Load Testers
Unlike simple voltage-only checkers, the KW650 reads cold cranking amps, internal resistance, state of health and state of charge. It also runs starter-motor and alternator-charging tests. The jump is worth it when you must diagnose no-start faults, verify alternator output or confirm battery replacement before buying.
Limits of the CCA Test Standard
Results follow CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB reference tables built into the firmware. Accuracy is quoted at 99.5 percent against a Midtronics reference. The tester cannot assess lithium-ion chemistries, high-voltage EV packs or batteries outside the 100-2000 CCA window.
Highlights
- Tests 6V and 12V batteries from 100 to 2000 CCA
- Supports flooded, AGM flat plate, AGM spiral and gel types
- Colour screen enables in-vehicle and out-of-vehicle testing
- Measures SOH, SOC, CCA value, voltage and internal resistance
- Polarity reverse protection with reminder light included
Specifications
| Brand | KONNWEI |
|---|---|
| Model | KW650 |
| Features | KW650 Battery Load Tester Key Features 1. Strong Capacity: Works on 6V&12V batteries, battery ratings from 100 - 2200 CCA, also starter and alternator; 2. Test Multiple Battery Types: regular flooded, AGM flat plate, AGM spiral and gel; 3. Color screen, support both in-vehicle and out-of-vehicle test, no need to remove the battery; 4. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB; 5. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc; 6. Provide reliable results within seconds, display suggestion according to the testing results (Good, |
| Height | 7.13 inch |
| Width | 6.02 inch |
| Length | 2.17 inch |
| Weight | 1.2 pounds |
| Fitment | KONNWEI KW650 6V 12V Car Battery Tester, 100-2000 CCA Battery Load Tester Automotive Battery and Alternator Tester for Vehicles/Marine/Motorcycle/Lawn Mover |
Questions about this item
What battery types and CCA range does the KW650 support?
The KW650 tests 6V and 12V batteries rated from 100 to 2000 CCA, covering regular flooded, AGM flat plate, AGM spiral and gel types.
How is the tester connected for an in-vehicle test?
Clamp the red lead to the positive terminal and the black lead to the negative terminal; the built-in polarity-reverse protection and reminder light guard against reversed connections.
What consumable items does the KW650 require over time?
The unit runs on an internal rechargeable battery and uses replaceable test leads; no other consumable parts are needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



