Jansicotek
Jansicotek KW650 12V 2000CCA Battery Tester
Tests 6V and 12V batteries from 100 to 2000 CCA with 99.5% accuracy and delivers health, charge and cranking results in milliseconds
- Size/Dimensions5.94 x 3.22 x 2.2 inches
- Item Count1× KONNWEI KW650 Car Tester 1× User Manual 1× We provide 3 y
- Energy Star QualifiedEnergy Star Qualified
- Selling UnitSet
- TypeMultifunction Testers
- FeaturesKONNWEI KW650 Function and Features 1. Works on ALL OBD II E
- Tests 6 V and 12 V batteries from 100 to 2000 CCA
- Conductance technology measures cold cranking amps in milliseconds
- STM-32 chip delivers over 99.5 % accuracy
- Shows voltage, resistance, health percentage and charge status
- Works on batteries inside or outside the vehicle
6 V and 12 V battery analyser
The Jansicotek KW650 tests 6 V and 12 V batteries from 100 to 2000 CCA including flooded, AGM flat plate, AGM spiral and gel types. It reads voltage, internal resistance, cold cranking amps, health percentage and charge status then advises whether to recharge or replace. The unit works on batteries inside or outside the vehicle and delivers results in milliseconds.
Check your battery type and CCA rating
Confirm the battery is a 6 V or 12 V lead-acid unit rated between 100 and 2000 CCA before testing. The analyser supports regular flooded, AGM flat plate, AGM spiral and gel chemistries; other chemistries are not covered. Ensure the terminals are clean and accessible for the supplied clamps.
Handheld tester with clamp leads
The device measures 5.94 x 3.22 x 2.2 inches and weighs little enough for one-hand use. Colour screen and a patented one-click readiness key make navigation straightforward. Clamp leads connect directly to battery posts for in-vehicle or bench testing and the unit includes a three-year after-sales service period.
Highlights
- Tests 6 V and 12 V batteries from 100 to 2000 CCA
- Conductance technology measures cold cranking amps in milliseconds
- STM-32 chip delivers over 99.5 % accuracy
- Shows voltage, resistance, health percentage and charge status
- Works on batteries inside or outside the vehicle
Specifications
| Brand | Konnwei |
|---|---|
| Model | KW650 |
| Size/Dimensions | 5.94 x 3.22 x 2.2 inches |
| Item Count | 1× KONNWEI KW650 Car Tester 1× User Manual 1× We provide 3 years long after-sale service. |
| Energy Star Qualified | Energy Star Qualified |
| Selling Unit | Set |
| Type | Multifunction Testers |
| Features | KONNWEI KW650 Function and Features 1. Works on ALL OBD II Enabled vehicles, both Gasoline and Diesel cars - domestic and imported. 2. Features the unique patented One-Click Readiness Key for quick State Emissions readiness check and drive cycle verification. 3. built-in speaker provide both visual and audible tone for readiness verification 4. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes 5. Easily determines the cause of the Check Engine Light(MIL) 6. Turns off Check Engine Light (MIL), clears codes and resets monitors 7. Views |
Questions about this item
What comes in the box and do I need any extra cables to start testing?
The set includes the KW650 tester and a user manual; the tester connects directly to the battery terminals so no additional cables are required.
Should I choose the 6 V or 12 V setting for a 12 V 2000 CCA battery?
Select the 12 V setting; the KW650 covers 6 V and 12 V batteries from 100 to 2000 CCA including flooded, AGM flat plate, AGM spiral and gel types.
What does the 99.5 % accuracy figure mean when I test a battery in my vehicle?
The STM-32 chip delivers results within milliseconds that match US Midtronics reference readings, giving you voltage, internal resistance, cold cranking amps, health percentage and a Good, Recharge or Replace recommendation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Lab Safety Supply Inc 667123 24 Well Tissue Culture Plate w/Lid PK50
- Assortments & Kits
Lab Safety Supply Inc 11L806 2mL Pipet Individually Wrapped PK600
- Assortments & Kits



