We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek KW208 12V 100-2000 CCA Battery Tester

SKU CH-M6GG-8GPX7 MPN KW208

Tests 12V batteries from 100 to 2000 CCA, covering flooded, AGM and gel types, with cranking and charging analysis plus in-vehicle or out-of-vehicle operation

  • Size/Dimensions5.98 x 3.39 x 1.77 inches
  • Item Count1*KONNWEI KW208 Auto Diagnostic Scanner 1*User’s Manual 1*On
  • Energy Star QualifiedEnergy Star Qualified
  • Selling UnitSet
  • TypeBattery Tester
  • FeaturesKONNWEI KW208 12V Car Battery Tester, 100-2000 CCA Load Test
  • Tests 12 V batteries from 100 to 2000 CCA
  • Checks flooded, AGM flat plate, AGM spiral and gel types
  • Measures health, cranking and charging systems in one tool
  • Delivers results in seconds with up to 99.9 % accuracy
  • Works in-vehicle or out-of-vehicle without removing the battery

12V 100-2000 CCA Battery Tester

The Jansicotek KW208 is a digital analyser for 12-volt lead-acid batteries rated between 100 and 2000 cold cranking amps. It evaluates flooded, AGM flat-plate, AGM spiral and gel types using standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN and SAE. The handheld unit suits vehicle owners and technicians who want a quick health, cranking and charging check without removing the battery.

Replaces Basic Voltage Meters

A simple multimeter only shows open-circuit voltage; this tester adds internal resistance, state of health, state of charge and a pass, recharge or replace recommendation. The jump is worth it when you need to confirm starter and alternator performance or detect a bad cell in seconds rather than guessing from voltage alone. Accuracy is quoted up to 99.9 percent with an STM-32 processor.

Check Battery Voltage Range && Terminal Access

Verify the battery is a 12-volt unit within the 100 to 2000 CCA window; 6-volt or higher-voltage systems are not supported. Ensure you can reach the terminals for the clamp connection, whether the battery sits in the vehicle or on the bench. Reverse-polarity protection is built in, but the clips must still make clean contact for a valid reading.

Highlights

  • Tests 12 V batteries from 100 to 2000 CCA
  • Checks flooded, AGM flat plate, AGM spiral and gel types
  • Measures health, cranking and charging systems in one tool
  • Delivers results in seconds with up to 99.9 % accuracy
  • Works in-vehicle or out-of-vehicle without removing the battery

Specifications

BrandKonnwei
ModelKW208
Size/Dimensions5.98 x 3.39 x 1.77 inches
Item Count1*KONNWEI KW208 Auto Diagnostic Scanner
1*User’s Manual
1*One Year Worry-free guarantee
Energy Star QualifiedEnergy Star Qualified
Selling UnitSet
TypeBattery Tester
FeaturesKONNWEI KW208 12V Car Battery Tester, 100-2000 CCA Load Tester Automotive Alternator Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Marine Motorcycle SUV Boat

Questions about this item

What are the physical dimensions of the KW208 tester?

The unit measures 5.98 x 3.39 x 1.77 inches, making it compact enough to store in a glove box or tool bag.

How do I connect the KW208 to a 12V battery for testing?

Clamp the red clip to the positive terminal and the black clip to the negative terminal; the tester powers on automatically. Reverse-polarity protection prevents damage if the clips are swapped.

Does the KW208 require calibration or consumable parts over time?

No calibration schedule or replaceable components are specified. The device relies on its internal STM-32 chip for accuracy up to 99.9% and is ready to use whenever the clips are connected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.