Jansicotek DP28 DisplayPort 1.4 cable 16.4ft Gray
- DisplayPort
- Gray
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Jansicotek
A 16.4 ft DisplayPort 1.4 male-to-male cable rated for 32.4 Gbps HBR3 bandwidth, supporting 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR and HDCP 2.2
This 16.4 ft DisplayPort 1.4 cable carries 32.4 Gbps bandwidth (HBR3) between a graphics card and a monitor. It supports 8K at 60 Hz, 5K at 60 Hz, 4K at 144 Hz, 2K at 240 Hz and 1080p at 240 Hz with HDR, HDCP 2.2 and DSC 1.2a. VESA certification and gold-plated, nylon-braided connectors ensure reliable plug-and-play operation.
Gamers and creators driving high-refresh 4K or 2K panels, or an 8K 60 Hz display, gain full HBR3 throughput at this length. Installations needing runs longer than 16.4 ft, or devices that only offer HDMI ports, cannot use this male-to-male DP link.
The 32.4 Gbps HBR3 rating is the single figure that determines whether the cable can deliver 8K 60 Hz, 4K 144 Hz or 2K 240 Hz without compression artefacts. If your source and sink both require HBR3 for those modes, this cable meets the requirement; if either end is limited to HBR2, the extra headroom goes unused.
| Brand | Jansicotek |
|---|---|
| Model | DP28 |
| Type | DisplayPort |
| Color | Black |
| Connector Number | 1 |
| Connect From | 1 x DisplayPort 1.4 |
| Connect To | 1 x DisplayPort 1.4 |
| Connector Detail | DisplayPort to DisplayPort( Male to Male) |
| Terminal Gender | Male to Male |
| Speed | Supports up to 32.4Gbps bandwidth. |
| Specifications | Bandwidth: 32.4Gbps Refresh Rate: 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz HDCP 2.2, HDCP 1.4, HDR.. Backward compatible with DisplayPort 1.3/1.2. Dynamic HDR, Multi-Screen Display Conductor Material : 28AWG Tinned Copper Supports BT601, BT709, BT2020, Adobe RGB Color Format |
| Refresh Rate | 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz |
| Features | 8K DisplayPort Cable 1.4 4K 144Hz 2K 240Hz About Brand Silkland: [Officially Certified VESA Member] Supports 8K@60Hz, 2K@240Hz, 4K@144Hz, 4K@60Hz, 5K@60Hz, 2K@165Hz, 1080P@240Hz, HDCP 2.2/1.4 and HDR HBR3 Rated, supports transmission speed up to 32.4Gbps Display Stream Compression 1.2(DSC), FEC forward error correction, and 32 audio channels HBR3 rated - Backward compatible with DisplayPort 1.3/1.2/1.1 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
It has one male DisplayPort 1.4 connector on each end, so it plugs directly into a graphics card and a monitor without adapters.
Push each male connector in until the latch clicks; otherwise the link may fall back to a lower bandwidth mode.
Replace it if the latch no longer holds, the braided jacket frays, or the link drops from 8K@60Hz to a lower refresh rate.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?