We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with three DisplayPort sockets and a USB-C power port

Jansicotek

Jansicotek DP 1.4 Bi-Directional Switch 8K@30Hz 4K@120Hz 2K@144Hz (OZQD)

SKU CH-PFRS-1C7WF

A bi-directional DisplayPort 1.4 switch toggles between two sources on one display or sends one source to two displays, supporting 8K at 30 Hz, 4K at 120 Hz and 1080p at 240 Hz with audio pass-through

  • TypeDisplayPort Splitters
  • Ports2
  • AudioYes
  • Input Connector1x DisplayPort female
  • Output Connector2x DisplayPort female
  • Maximum Resolutions8K@30Hz, 4K@120Hz, 1080P@240Hz
  • Bi-directional DP 1.4 switch handles two sources or two displays
  • 8K at 30 Hz and 4K at 120 Hz for sharp motion
  • 1080p at 240 Hz supported for high-refresh gaming
  • 4 Gbps bandwidth carries uncompressed audio and video together
  • One-button switching with LED indicator for instant source change

Bi-Directional DP 1.4 Switch

This Jansicotek switch lets you connect two DisplayPort sources to one display or one source to two displays. It supports 8K at 30 Hz, 4K at 120 Hz and 1080p at 240 Hz over a 32.4 Gbps link. The unit is aimed at users who need to share a single high-resolution monitor between a PC and a laptop or console without unplugging cables.

Passive cooling and USB-C power

The device has no fan and draws power from an included USB-C cable, so it adds no audible noise to a quiet workstation. Typical draw is low enough for a standard USB port on a monitor or PC. An LED indicator shows the active channel, and a single button toggles between inputs instantly.

Compact two-port hub for tight desks

Two female DisplayPort sockets and a USB-C power port fit in a small enclosure that sits behind a monitor stand. The package includes the switch, a USB-C charging cable and a manual. It does not support VR headsets such as Valve Index or Xbox consoles. Buyers who need simultaneous output to two screens or automatic switching should look elsewhere.

Highlights

  • Bi-directional DP 1.4 switch handles two sources or two displays
  • 8K at 30 Hz and 4K at 120 Hz for sharp motion
  • 1080p at 240 Hz supported for high-refresh gaming
  • 4 Gbps bandwidth carries uncompressed audio and video together
  • One-button switching with LED indicator for instant source change

Specifications

TypeDisplayPort Splitters
Ports2
AudioYes
Input Connector1x DisplayPort female
Output Connector2x DisplayPort female
Maximum Resolutions8K@30Hz, 4K@120Hz, 1080P@240Hz
Bandwidth32.4Gbps
Package Contents1x Bi-Direction DP Switch, Power Charging Cable x1, User Manual x1.

Questions about this item

How do I install the Jansicotek DP 1.4 bi-directional switch and what is the step people often miss?

Connect each source to the two DisplayPort inputs and the display to the single output, then plug the USB-C power cable into a 5 V supply; the step often missed is powering the switch before expecting a signal.

What maintenance or replacement will the Jansicotek DP 1.4 switch need over time?

No routine maintenance is required; if the USB-C power cable or the manual button becomes faulty, replace the cable or the whole unit.

What is the first limit I will hit when running the Jansicotek DP 1.4 switch at 4K 120 Hz for long sessions?

The 32.4 Gbps bandwidth ceiling is reached first, so sustained 4K 120 Hz works but any higher resolution or refresh rate would exceed the link capacity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.