We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black H3 LED headlight bulbs with clear lenses and cooling fans

Jansicotek

Jansicotek AKAS T1-H3 H3 LED headlight kit 70W 7200LM 6000K set of 2

SKU CH-WYCV-BYFDA

H3 LED headlight kit delivers 7200 lumens at 6000 K with a 61–120° beam angle and IP67-rated turbo fan cooling

  • TypeHeadlights
  • Switch IncludedYes
  • Selling UnitSet of 2
  • Color/Finish6000K (Pure White)
  • Beam Angle Range61 to 120 deg
  • Beam TypeFog-light

Size H3

Struck-through versions exist but are not stocked here.

  • Pure white 6000K light for crisp night vision
  • 7200 lumen pair output lights the road ahead
  • 35 watts per bulb keeps electrical load low
  • IP67 waterproof rating handles rain and spray
  • 50000 hour LED life reduces replacement frequency

H3 LED Headlight Kit

The Jansicotek AKAS T1-H3 kit supplies two H3-size LED bulbs for headlamp or fog-light positions. Each bulb draws 35 W and emits 6000 K pure white light. The set delivers up to 7200 lumens total. It suits drivers replacing factory halogen units on compatible vehicles.

Turbo Fan and Canbus Integration

A 12 000 RPM turbo fan keeps the heat sink 30 % cooler than standard designs for sustained output. Built-in current control and dual polarity support 9 V to 32 V systems. The Canbus-ready design prevents dashboard errors on most modern vehicles. Installation follows a plug-and-play approach.

61-to-120-Degree Beam Angle

The convex LED chips project a 61-to-120-degree spread tuned for fog-light patterns without dark spots. Buyers needing a narrow long-range high-beam focus should verify suitability. The kit is not for applications requiring a different bulb base or a tighter hotspot.

Highlights

  • Pure white 6000K light for crisp night vision
  • 7200 lumen pair output lights the road ahead
  • 35 watts per bulb keeps electrical load low
  • IP67 waterproof rating handles rain and spray
  • 50000 hour LED life reduces replacement frequency

Specifications

BrandJansicotek
ModelAKAS T1-H3
TypeHeadlights
Switch IncludedYes
Selling UnitSet of 2
Color/Finish6000K (Pure White)
Beam Angle Range61 to 120 deg
Beam TypeFog-light
SizeH3
Current ControlYes
Current Draw2 watts
Dual PolarityYes
Forward Voltage9-14.5V
High PowerYes
Housing ColorBlack
Lens ColorClear
Light Bulb IncludedYes
Light Color Temperature6000K (Pure White)
Light SourceLED
LocationDriver and Passenger Side, Mounted on Body
Lumen Output3200
Operating Voltage12-24V
Product FitDirect Fit Performance
V-Star Rating5
Wiring Harness IncludedYes
CAN bus CompatibilityYes
Certification/StandardsDOT
MaterialABS
QualityPerformance
ShapeXenon

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the built-in 12 000 RPM turbo fan need cleaning or replacement during the 50 000 hour rated life?

The fan is sealed inside an IP67 housing and designed to run continuously for the full 50 000 hour LED lifespan without scheduled maintenance.

What stops the bulbs from drawing more than the rated 3.2 A when the engine is running at 14.5 V?

On-board current control limits each H3 bulb to 35 W, so the pair stays at 70 W and 3.2 A even at the upper 14.5 V input.

How hot does the heat-sink get after hours of night driving?

The turbo fan keeps the heat-sink 30 % cooler than a standard design, allowing continuous full-lumen output during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.