We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 9004 LED headlight bulbs with clear lenses and cooling fans

Jansicotek

Jansicotek AKAS T1-9004 9004/HB1 Hi/Lo LED Headlight Bulbs 70W 7200LM 6000K Cool White Set of 2

SKU CH-05Y3-Y4SVS

Dual-beam 9004 LED headlight kit delivers 7200 lumens at 6000K cool white with IP67 waterproofing and a 12,000 RPM cooling fan for 50,000-hour life

  • TypeHeadlights
  • Switch IncludedYes
  • Selling UnitSet of 2
  • Color/Finish6000K (Pure White)
  • Beam Angle Range61 to 120 deg
  • Beam TypeDual Beam

Size 9004

Struck-through versions exist but are not stocked here.

  • Dual-beam 9004 LED kit delivers 7200 lumens per set for wider night vision
  • 6000 K cool-white output matches daylight colour for reduced eye strain
  • Convex LED chips rated 50000 hours lifespan maintain brightness over years
  • Turbo fan keeps heat sink 30 % cooler for stable lumen output
  • DC 9-32 V range with Canbus fits most vehicles without error codes

What these bulbs replace

This set of two 9004/HB1 LED headlight bulbs fits the dual-beam socket used for both high and low beam on many vehicles. Each bulb draws 35 watts and produces 3600 lumens at 6000K cool white, giving a combined 70 watts and 7200 lumens per pair. The convex LED chips and built-in current control operate on a 9 to 14.5 volt range with dual-polarity support.

Who gains and who looks elsewhere

Drivers wanting a direct halogen replacement with a 61 to 120 degree beam spread and a 50000-hour rated life will find the output and colour temperature suitable. Buyers who need a different socket type, a warmer colour, or a single-beam configuration cannot use this kit. Vehicles that require additional CANbus resistors or professional headlamp removal should verify compatibility before ordering.

Build fit and clearance

The bulbs include a 12000 RPM IP67 turbo fan and a heat sink that runs 30 percent cooler than standard designs, so they need enough room behind the headlamp housing for the fan and driver module. The plug-and-play base connects to the factory wiring without splicing, and the dual-polarity circuit works with both positive and negative ground systems. Ensure the housing depth can accommodate the fan assembly before installation.

Highlights

  • Dual-beam 9004 LED kit delivers 7200 lumens per set for wider night vision
  • 6000 K cool-white output matches daylight colour for reduced eye strain
  • Convex LED chips rated 50000 hours lifespan maintain brightness over years
  • Turbo fan keeps heat sink 30 % cooler for stable lumen output
  • DC 9-32 V range with Canbus fits most vehicles without error codes

Specifications

BrandJansicotek
ModelAKAS T1-9004
TypeHeadlights
Switch IncludedYes
Selling UnitSet of 2
Color/Finish6000K (Pure White)
Beam Angle Range61 to 120 deg
Beam TypeDual Beam
Size9004
Current ControlYes
Current Draw2 watts
Dual PolarityYes
Forward Voltage9-14.5V
High PowerYes
Housing ColorBlack
Lens ColorClear
Light Bulb IncludedYes
Light Color Temperature6000K (Pure White)
Light SourceLED
LocationDriver and Passenger Side, Mounted on Body
Lumen Output3200
Operating Voltage12-24V
Product FitDirect Fit Performance
V-Star Rating5
Wiring Harness IncludedYes
CAN bus CompatibilityYes
Certification/StandardsDOT
MaterialABS
QualityPerformance
ShapeXenon

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does my vehicle need a 9004/HB1 socket for these bulbs to fit?

Yes, the bulbs are sized 9004 and replace the factory 9004/HB1 dual-beam capsules directly.

Will the built-in Canbus driver prevent flicker on a 12 V electrical system?

The driver accepts DC 9 V–32 V and draws 3.2 A ±0.2 A, so it operates steadily on standard 12 V vehicle networks.

How can I confirm the beam pattern is correct after installation?

Check for a clean cut-off with no dark spots; each bulb delivers 3600 lm at 6000 K across a 61–120° spread.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.