We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular USB 3.0 to SATA IDE adapter with 40-pin and 44-pin connectors and power supply

Jansicotek

Jansicotek 3 in 1 USB 3.0 to SATA IDE Adapter 2.5 3.5 inch hard drive adapter

SKU CH-FKF2-M4KWN

Connects 2.5" or 3.5" SATA and IDE drives to USB 3.0, accessing three drives at once with 5 Gbps transfer and 12 V power included

  • ColorBlack
  • Connect 2.5" and 3.5" SATA and IDE drives via USB 3.0
  • Access three drives at once for simultaneous file transfers
  • Achieve up to 5 Gbps transfer speed with USB 3.0 interface
  • Supports drives up to 6 TB capacity for large backups
  • Works with Windows, Mac OS and Linux without extra drivers

Three-Drive Adapter for Legacy and Modern Disks

This USB 3.0 to SATA and IDE adapter connects 2.5 and 3.5 inch SATA or IDE hard drives and SSDs to a computer through a single USB port. It provides one SATA II connector plus 40-pin and 44-pin IDE connectors so you can access up to three drives at the same time for cloning, backup or data recovery. The device is plug-and-play on Windows, macOS and Linux.

Check Power and Port Requirements Before Use

Verify that your drives use standard SATA or 40-pin and 44-pin IDE interfaces; other connector types are not supported. The kit includes a 12 V 2 A power supply that must be used for 3.5 inch drives and optical drives, while 2.5 inch units can often run from the USB port alone. Ensure a free USB 3.0 or 2.0 port is available on the host system.

Thermals Noise and Power in Normal Operation

The adapter draws power from the included 12 V 2 A supply for larger drives and from the USB bus for smaller ones, with no active cooling fan fitted. Operation is silent because there are no moving parts in the converter itself. An LED indicator shows power and activity status while data transfers run at up to 5 Gbps over USB 3.0.

Highlights

  • Connect 2.5" and 3.5" SATA and IDE drives via USB 3.0
  • Access three drives at once for simultaneous file transfers
  • Achieve up to 5 Gbps transfer speed with USB 3.0 interface
  • Supports drives up to 6 TB capacity for large backups
  • Works with Windows, Mac OS and Linux without extra drivers

Specifications

ColorBlack

Questions about this item

Does the Jansicotek adapter come with a power supply and cable, or do I need to buy them separately?

The package includes a 12V/2A power supply and a USB 3.0 cable, so no extra purchases are required for power or host connection.

Which drive types and connector sizes does this model support?

It connects 2.5" and 3.5" SATA HDDs or SSDs, plus 2.5" (44-pin) and 3.5" (40-pin) IDE hard drives, and optical drives such as DVD-ROM or CD-RW.

What does the 5 Gbps USB 3.0 rating mean for actual transfer speeds with a SATA drive?

The 5 Gbps ceiling is the USB 3.0 bus limit; real-world throughput will be capped by the connected drive's own SATA speed, typically well below the theoretical maximum.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.