We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with three RCA ports and HDMI output

Jansicotek

Jansicotek 1080p RCA CVBS to HDMI Audio Video Converter Black

SKU CH-DG52-VMVYJ

Converts composite RCA video to HDMI at 1080p or 720p with USB power included

  • Changer TypeRCA Connectors
  • Style1080p
  • ColorBlack
  • OutputHDMI
  • Converts legacy RCA composite to modern HDMI for current displays
  • Upscales analogue video to 1080p60 or 720p60 output resolutions
  • Works with PAL, NTSC 3.58, NTSC 4.43, SECAM and regional variants
  • Driver-free plug-and-play operation with included USB power cable
  • 10-bit 162MSPS sampling enhances colour transitions and dynamic range

Jansicotek 1080p RCA to HDMI Converter

This converter turns composite AV signals into HDMI output for modern displays. It accepts PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL/M and PAL/N standards from sources such as VHS players, retro consoles or set-top boxes. The unit outputs 1080p or 720p at 60 Hz using 10-bit sampling at 162 MSPS. It is not for buyers who need to connect Super Nintendo or Apple devices due to compatibility limits.

Build integration with USB power and single HDMI

The adapter needs a 5 V USB power source via the included cable before it will operate. Connect the yellow, white and red RCA plugs from the source device to the converter input. A single standard HDMI cable then carries the upscaled digital signal to the TV or monitor. No drivers or software installation are required, keeping the signal chain simple for portable or permanent setups.

Included USB cable enables immediate operation

The supplied USB charging cable provides the necessary power without a separate mains adapter. Plug it into any convenient 5 V USB port on the display, a charger or a powered hub. This lets the converter start processing composite video straight away, delivering 1080p60 or 720p60 output with colour transition improvement and dynamic range expansion. No extra accessories are needed for basic use.

Highlights

  • Converts legacy RCA composite to modern HDMI for current displays
  • Upscales analogue video to 1080p60 or 720p60 output resolutions
  • Works with PAL, NTSC 3.58, NTSC 4.43, SECAM and regional variants
  • Driver-free plug-and-play operation with included USB power cable
  • 10-bit 162MSPS sampling enhances colour transitions and dynamic range

Specifications

Changer TypeRCA Connectors
Style1080p
ColorBlack
ModelStandard
OutputHDMI

Questions about this item

Will the 162 MSPS sampling rate sustain 1080p60 output without dropped frames?

The converter samples at 162 MSPS with 10-bit depth and auto-converts composite input to 1080p at 60 Hz, maintaining continuous output for supported PAL and NTSC formats.

Does the unit run hot or draw noticeable power when powered from a 5 V USB source all day?

It is powered by the included USB cable from any 5 V source; no fan or heatsink is mentioned, and the low-power design is intended for continuous operation without active cooling.

Which legacy devices can I connect directly to the yellow-white-red RCA inputs?

Any source with composite video output — PS3, DVD/VCR players, STBs, or other gear using PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL/M or PAL/N standards — plugs straight into the three RCA jacks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.