Jamiikury 3PCS M5 Eye & Eye Turnbuckle 304 Stainless Steel
Three M5 eye-and-eye turnbuckles in 304 stainless steel adjust cable tension from 4.88" to 6.7" with a 125 lbs working load limit
- FinishEye & Eye, JMMH220704232T
- Secure anchoring with closed-loop eyes on both ends
- Corrosion-resistant 304 stainless steel for long outdoor life
- Precise tension control via right- and left-hand threads
- 125 lbs working load limit for wire rope and cable
- Three-piece pack covers multiple rigging points
M5 Eye & Eye Turnbuckle Kit
This set contains three M5 eye-and-eye turnbuckles made from 304 stainless steel. Each piece has a thread diameter of 5 mm and a body inside length of 73 mm. They are designed for tensioning wire rope, chain or cable in architectural, marine and general rigging tasks.
Suits light-duty rigging and fixed anchor points
The closed-loop eyes on both ends give a secure attachment where hooks could detach. Builders needing a working load above 55 kg or a thread size larger than M5 should look at heavier hardware. The kit is not intended for lifting people or dynamic shock loads.
Working load limit 55 kg per turnbuckle
Each turnbuckle is rated at 125 lbs or 55 kg working load limit. The adjustable length ranges from 124 mm minimum to 170 mm maximum. This single figure determines whether the hardware matches the tension requirement of your project.
Highlights
- Secure anchoring with closed-loop eyes on both ends
- Corrosion-resistant 304 stainless steel for long outdoor life
- Precise tension control via right- and left-hand threads
- 125 lbs working load limit for wire rope and cable
- Three-piece pack covers multiple rigging points
Specifications
| Brand | Jamiikury |
|---|---|
| Finish | Eye & Eye, JMMH220704232T |
Questions about this item
How many turnbuckles come in the pack and what is their working load limit?
The pack contains three M5 eye & eye turnbuckles, each rated for a working load limit of 125lbs (55kg).
What adjustment range does the 73 mm body give once installed?
The 73 mm body lets you tension from a minimum of 124 mm up to a maximum of 170 mm overall length.
What thread standard does the M5 turnbuckle use and how does it affect tightening?
It uses 5 mm right- and left-hand threads so rotating the body draws both eyes together for precise tension control.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
