JacobsParts Inc.
JacobsParts Inc. PCIEPWR-K 8-pin to 2x 6+2-pin 18 AWG 20cm
Splits one 8-pin PCIe connector into two 6+2-pin plugs using 18 AWG copper wire over 20 cm length
- TypeCable
- Length8 inches
- Terminal GenderMale
- Splits one 8-pin connector into two 6+2-pin plugs
- 18 AWG copper wire carries up to 300W safely
- 20 cm length keeps cable routing tidy
- Male 6+2-pin ends fit both 6-pin and 8-pin graphics cards
- Female 8-pin end plugs directly into power supply
Splitter for single 8-pin sources
This cable splits one 8-pin PCIe power connector into two 6+2-pin male plugs. It lets a graphics card that needs dual power inputs draw from a single port on the power supply. The 20 cm length suits compact builds where excess cable would block airflow.
18 AWG wire and 300 W limit
The 18 AWG copper conductors handle typical mid-range cards within the 300 W safety ceiling for a single 6-pin source. Running two high-draw GPUs or a single card that exceeds this limit risks overheating the wire and the source connector. Check your card’s total board power before connecting both branches.
Fixed length and connector gender
The 20 cm reach restricts routing options in larger chassis or when the power supply sits far from the graphics card. The male 6+2-pin ends plug directly into the card, so no extra adapters are needed, but the short pigtail cannot be extended without adding another junction. Builders needing longer runs should plan cable management accordingly.
Highlights
- Splits one 8-pin connector into two 6+2-pin plugs
- 18 AWG copper wire carries up to 300W safely
- 20 cm length keeps cable routing tidy
- Male 6+2-pin ends fit both 6-pin and 8-pin graphics cards
- Female 8-pin end plugs directly into power supply
Specifications
| Brand | JacobsPartss |
|---|---|
| Model | PCIEPWR-K |
| Type | Cable |
| Length | 8 inches |
| Terminal Gender | Male |
Questions about this item
Will the 8-inch 18 AWG splitter reach a second GPU slot on an older motherboard?
The cable is 20 cm long, so measure from your PSU 8-pin port to the farthest graphics-card connector; if the gap exceeds 20 cm you will need a longer lead.
How can I confirm the 6+2-pin ends are delivering power to my card after installation?
Power on the system and verify the GPU fans spin and the board posts; if the card shows no life, reseat both 6+2-pin plugs and check the PSU 8-pin source connection.
Does the package include any extra 6-pin adapters or mounting ties?
Only the 8-pin female to dual 6+2-pin male splitter is supplied; no additional adapters or cable ties are included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



