We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 5 metre flexible LED strip on a spool, daylight white, adhesive backing, female barrel jack

JacobsParts Inc.

JacobsParts Inc. LED strip light 6000K 120 LED/m 5m 12V

SKU CH-TRYS-2KAH6

A 5 m indoor LED strip delivers 600 SMD3528 chips at 6000 K for 2200 lumens, cuts every three LEDs and sticks with adhesive backing

  • style‎Custom
  • material‎Other
  • lightcolor‎Daylight White
  • length5m
  • typeIndoor
  • voltage‎12 Volts
  • Daylight white 6000K output for clear task lighting
  • Double-density 120 LEDs per metre across 5 metres
  • Cuttable every 3 LEDs with adhesive backing for custom runs
  • Professional double-PCB design lowers resistance and heat
  • 2200 total lumens at 31 watts from 12 V supply

Double-density daylight strip

This 5-metre reel carries 600 SMD3528 chips at 120 LEDs per metre, delivering 6000K daylight white at 2200 lumens total. It runs on 12 VDC and draws 2.6 A for 31 W overall, with a 5.5 × 2.1 mm female barrel jack for power. The professional-grade double PCB uses twice the copper of standard strips to lower resistance and heat. Indoor-only IP20 rating limits use to dry locations.

DIY and professional installs

Suits hobbyists and lighting pros who need cut-to-length runs for under-cabinet, sign, architectural or automotive accent work. The strip segments every three LEDs, so custom lengths are straightforward. Buyers who need weatherproof outdoor runs, dimming control or a bundled power supply should look at something else. No controller or adapter is included in the package.

Peel-stick and plug-in

Installation is peel-and-stick thanks to the adhesive backing; simply press the strip in place and connect the barrel jack to a 12 V adapter. The strip can be cut at every three-LED interval, but each cut piece needs its own power feed or a soldered jumper. Common issues are insufficient adapter amperage for the full 2.6 A draw and voltage drop on unpowered segments.

Highlights

  • Daylight white 6000K output for clear task lighting
  • Double-density 120 LEDs per metre across 5 metres
  • Cuttable every 3 LEDs with adhesive backing for custom runs
  • Professional double-PCB design lowers resistance and heat
  • 2200 total lumens at 31 watts from 12 V supply

Specifications

BrandJacobsParts
style‎Custom
material‎Other
lightcolor‎Daylight White
length5m
typeIndoor
voltage‎12 Volts

Questions about this item

What power supply do I need to run the 12 V, 2.6 A LED strip?

You need a 12 V DC adapter rated for at least 2.6 A (31 W) with a 5.5 × 2.1 mm male barrel plug to match the strip's female jack.

Can I connect the 5.5 × 2.1 mm barrel plug on this strip to an older 12 V transformer that uses bare wires?

Yes — cut off the barrel plug, strip the two conductors, and wire them to the transformer's output, observing polarity; the strip draws 2.6 A at 12 V.

How can I verify the strip is delivering the rated 2200 lm after installation?

Measure 12 V at the strip's input and confirm it draws about 2.6 A; the 600 SMD3528 LEDs on the double-density PCB should then produce the specified 2200 lm at 6000 K.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.