We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five small black inline RGB amplifiers with bare wires and 4-pin connectors

JacobsParts Inc.

JacobsParts Inc. LED-DIMMER-07 12V RGB LED amplifier lighting

SKU CH-AA7R-4HVW7 MPN LED-DIMMER-07

Extends RGB strip lighting with matched colour and brightness using a separate 12 V power source and bare-wire DC connectors

  • Maximum Wattage3x36W
  • Voltage12V
  • Item Count1
  • TypeLed Amplifier
  • Extends RGB strips with identical colour and brightness
  • 12 V operation supports standard LED installations
  • 36 W per channel handles high-output strips
  • Bare-wire DC plus two 4-pin connectors simplify wiring
  • Chain multiple units for unlimited run length

Product identity

This JacobsParts LED-DIMMER-07 is a 12V RGB LED amplifier sold in a five-pack. It replicates the PWM signal from an existing strip so additional segments show identical colour and brightness while drawing power from a separate supply.

Best fit and limits

Installers who need to extend RGB runs beyond a single power supply will benefit from the bare-wire DC and dual 4-pin connectors. Buyers who want a standalone controller with user input or who require voltage other than 12V should look elsewhere.

Compatibility check

Verify that the existing strip operates at 12V and uses a four-pin RGB layout. Confirm the power supply can deliver up to 36W per channel for the added length. Ensure wiring polarity matches the amplifier’s bare-wire terminals before connecting.

Highlights

  • Extends RGB strips with identical colour and brightness
  • 12 V operation supports standard LED installations
  • 36 W per channel handles high-output strips
  • Bare-wire DC plus two 4-pin connectors simplify wiring
  • Chain multiple units for unlimited run length

Specifications

BrandJacobsParts
ModelLED-DIMMER-07
Maximum Wattage3x36W
Voltage12V
Item Count1
TypeLed Amplifier

Questions about this item

What power supply must I already have to run the 12V RGB amplifier?

You need a separate 12V DC power source rated for at least 36W per channel to feed the new strip.

Will the unit match colours from my existing 4-pin RGB strips?

Yes, it copies the PWM signal from the connected strip so the extended section shows identical colour and brightness.

How can I confirm the amplifier is reproducing the signal correctly?

Check that the extended strip changes colour and brightness in perfect step with the original strip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.