JacobsParts Inc.
JacobsParts Inc. ADP-35635-D 6.35mm to 3.5mm TRS Stereo Audio Adapter Gold
Connects 3.5 mm headphones or microphones to 6.35 mm audio jacks on amplifiers, mixers and receivers using a gold-plated TRS adapter
- TypeAdapter Converter
- ColorGold
- Connector A6.35 mm (1/4 in) Jack Male
- Connector B3.5 mm Jack Female
- FeaturesGold Plated
- Connect 3.5 mm headphones to 6.35 mm pro audio gear using the 3-pole TRS connector
- Gold-plated contacts resist corrosion and maintain signal quality over repeated use
- Male 6.35 mm jack plugs directly into amplifiers, mixers and receivers
- Female 3.5 mm socket accepts standard headphone and microphone plugs
- Compact ADP-35635-D adapter adds no bulk to your audio chain
6.35 mm to 3.5 mm TRS Adapter
This gold-plated adapter converts a 6.35 mm (1/4 inch) male jack into a 3.5 mm (1/8 inch) female socket. It lets you plug standard headphones or microphones into professional audio gear, amplifiers, mixers and receivers. The 3-pole TRS wiring carries a stereo signal without modification. It is a simple, passive solution for connecting consumer audio devices to larger jack inputs.
Capacity and headroom
The adapter handles the full analogue stereo bandwidth that the connected equipment provides. Signal quality depends entirely on the source and the headphones used; the gold-plated contacts resist corrosion to maintain a clean path. It adds no amplification or processing, so dynamic range and impedance matching are unchanged. Users needing balanced mono or multi-channel connections will find this two-conductor-plus-ground design insufficient.
3-pole TRS wiring
The single specification that decides compatibility is the 3-pole TRS (tip-ring-sleeve) configuration on both ends. This matches standard stereo headphones and most consumer microphones with a combined plug. It will not pass a separate microphone contact found on 4-pole TRRS headsets, nor will it carry a balanced signal required by some professional line-level gear. Check your device plug count before buying.
Highlights
- Connect 3.5 mm headphones to 6.35 mm pro audio gear using the 3-pole TRS connector
- Gold-plated contacts resist corrosion and maintain signal quality over repeated use
- Male 6.35 mm jack plugs directly into amplifiers, mixers and receivers
- Female 3.5 mm socket accepts standard headphone and microphone plugs
- Compact ADP-35635-D adapter adds no bulk to your audio chain
Specifications
| Brand | JacobsParts |
|---|---|
| Model | ADP-35635-D |
| Type | Adapter Converter |
| Color | Gold |
| Connector A | 6.35 mm (1/4 in) Jack Male |
| Connector B | 3.5 mm Jack Female |
| Features | Gold Plated |
Questions about this item
Will my 3.5 mm headphones with an inline microphone work through the 3-pole TRS connector on this ADP-35635-D adapter?
Yes, the 3-pole TRS connector carries stereo audio and the microphone signal, so a standard 3.5 mm headset plugs straight into the female jack and functions normally with pro audio gear.
How can I verify the gold-plated contacts are making a solid connection after I plug it into my mixer?
Insert the 6.35 mm male plug fully until it seats firmly; you should hear a clean, noise-free signal with no crackling when you wiggle the cable, confirming the gold-plated contacts are engaged.
Does the ADP-35635-D package include any extra cables or do I only receive the gold 6.35 mm male to 3.5 mm female adapter?
Only the single gold-plated adapter is supplied; no additional cables or accessories are included, so have your 3.5 mm headphone cable ready to connect.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115009BTC
In stock
