JacobsParts Inc.
JacobsParts Inc. ADP-10W 5V 2A 10W Power Adapter 3.5mm x 1.35mm
Supplies 5V 2A power to USB hubs with a 3.5 x 1.35 mm barrel connector, 100-240V input for worldwide use
- TypeAC/DC Adapter
- Colorblack
- Cable Length1 Meter / 3 Feet
- Connector StyleMale Barrel
- Worldwide input range covers 100 to 240 V
- Delivers 10 W at 5 V 2 A for USB hubs
- 5 mm by 1.35 mm barrel fits small power ports
- One metre cable gives flexible placement
- Black AC/DC adapter built for reliable daily use
What this adapter powers
A compact AC/DC supply delivering 5V at 2A with a 3.5mm by 1.35mm male barrel connector. It is intended for USB hubs and similar peripherals that draw up to 10W from a small-barrel DC jack. The unit accepts 100-240V input for worldwide mains compatibility.
Check before ordering
Confirm your device requires exactly 5V DC and a centre-positive 3.5mm by 1.35mm barrel plug. Verify the polarity symbol on the hardware matches the adapter tip. Ensure the equipment's current draw does not exceed 2A. The cable is fixed at 1 metre, so measure the distance to your wall socket.
Fitting into your setup
The black adapter plugs directly into a mains outlet and frees a USB hub from relying on a host port for power. Its 1 metre lead reaches nearby sockets without excess slack. No extra cables or gender changers are needed when the device matches the 3.5mm by 1.35mm specification.
Highlights
- Worldwide input range covers 100 to 240 V
- Delivers 10 W at 5 V 2 A for USB hubs
- 5 mm by 1.35 mm barrel fits small power ports
- One metre cable gives flexible placement
- Black AC/DC adapter built for reliable daily use
Specifications
| Brand | JacobsParts |
|---|---|
| Model | ADP-10W |
| Type | AC/DC Adapter |
| Color | black |
| Cable Length | 1 Meter / 3 Feet |
| Connector Style | Male Barrel |
Questions about this item
Does the package include only the adapter or are extra cables required for a USB hub?
The box contains the single 1 metre ADP-10W adapter with its fixed 3.5 mm x 1.35 mm male barrel plug; no separate cable is needed for a compatible hub.
Is the 5 V 2 A 10 W rating the only version available for this connector size?
Yes, the ADP-10W is offered in this single 5 V 2 A 10 W configuration for the 3.5 mm x 1.35 mm barrel.
Will the 10 W output actually run a 4-port USB hub with multiple drives attached?
The adapter delivers up to 10 W at 5 V, so it can power a hub whose total draw stays within that 2 A limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



