We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Warm white LED strip on reel with adhesive backing and barrel connector

JacobsParts Inc.

JacobsParts Inc. 10M 600 LED Flexible Strip Light 24V Warm White 2800K SMD 2835

SKU CH-8E9V-52XVM

A 10 metre indoor LED strip with 600 SMD 2835 chips delivering 2200 lumens of warm white 2800K light, cuttable every 6 LEDs and powered by a 24V adapter via adhesive backing and barrel jack

  • style?Custom
  • material?Vinyl, metal, Copper
  • typeIndoor
  • voltage?12 Volts
  • Warm 2800K glow creates cosy indoor ambience
  • 600 SMD 2835 LEDs deliver 2200 total lumens
  • Cut every 6 LEDs for custom 10 metre runs
  • Adhesive backing and barrel jack simplify 24V installation
  • Double-layer PCB with extra copper reduces heat and extends life

Warm-white LED strip for DIY

This 10-metre reel carries 600 SMD 2835 LEDs at 60 per metre, producing 2200 lumens of warm white light at 2800K. It suits under-cabinet, signage, architectural and automotive projects where a low-profile indoor source is needed. The flexible vinyl-backed strip runs on 24 volts and is rated IP20 for dry locations.

Adhesive backing and barrel jack simplify connection

A factory-applied adhesive layer lets the strip bond directly to clean surfaces without extra brackets. The female barrel power jack accepts a standard 24V adapter so no soldering is required for the initial hookup. Accessories such as controllers, dimmers and solderless connectors are available separately for expanded control.

Cut points every six LEDs allow custom lengths

The double-layer PCB can be trimmed at marked intervals of six LEDs, letting installers match exact cabinet runs or sign shapes. Cutting elsewhere breaks the circuit, so measuring before snipping is essential. The PCB's extra copper reduces resistance and heat, but the strip must stay on a flat, heat-dissipating surface and cannot be used outdoors or in damp areas.

Highlights

  • Warm 2800K glow creates cosy indoor ambience
  • 600 SMD 2835 LEDs deliver 2200 total lumens
  • Cut every 6 LEDs for custom 10 metre runs
  • Adhesive backing and barrel jack simplify 24V installation
  • Double-layer PCB with extra copper reduces heat and extends life

Specifications

BrandJacobsParts
style?Custom
material?Vinyl, metal, Copper
typeIndoor
voltage?12 Volts

Questions about this item

How often will the adhesive backing need replacing on the 10 m strip?

The strip uses a factory-applied adhesive backing designed for permanent indoor mounting; replacement is only needed if the surface is cleaned or the strip is repositioned.

What limits continuous run length on the 24 V, 600 LED reel?

Voltage drop becomes noticeable beyond a single 10 m reel at 60 LEDs per metre; additional reels require separate 24 V feeds to maintain 2200 lm output.

How warm does the double-PCB strip get during all-day operation at 2200 lm?

The double-layer PCB with extra copper keeps the strip warm to the touch but well within the IP20 indoor rating during continuous 24 V use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.