We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White polypropylene hand bilge pump with dual 1 inch hose barbs

JABSCO

JABSCO 29240-0000 Hand Bilge Pump Trap

SKU CH-WAPY-WTF2K MPN 29240-0000

Manual bilge pump moves 12 gallons per minute with 13-foot self-priming lift

  • TypeDrain Components
  • Manual bilge removal with 12 gpm flow
  • Self-priming lift to 13 ft handles deep sumps
  • Polypropylene body resists corrosion and chemicals
  • 1 in hose-barb ports simplify hose connections
  • Compact 7 × 7 × 8 in size fits tight bilges

Hand Bilge Pump Trap

The JABSCO 29240-0000 is a manual bilge pump designed to remove unwanted water from boat hulls and similar compartments. Its polypropylene body resists corrosion in marine environments. The unit operates by hand lever action, delivering a flow rate of 12 gpm with a maximum self-priming lift of 13 ft.

Suitable users and limitations

This pump suits boat owners needing a reliable, non-electric backup or primary dewatering solution for small to medium craft. It handles fluids up to 31 SUS viscosity through 1 in MHB inlet and discharge ports. Buyers who want automatic operation, higher flow rates, or electric power should look at something else.

Deciding specification

The critical figure is the 12 gpm flow rate at 13 ft self-priming lift, which determines whether the pump can clear your compartment volume in an acceptable time. Match the 1 in MHB port size to your existing hose or fitting layout. The 1 yr manufacturer warranty covers defects in materials and workmanship.

Highlights

  • Manual bilge removal with 12 gpm flow
  • Self-priming lift to 13 ft handles deep sumps
  • Polypropylene body resists corrosion and chemicals
  • 1 in hose-barb ports simplify hose connections
  • Compact 7 × 7 × 8 in size fits tight bilges

Specifications

TypeDrain Components
BrandJabsco
Model29240-0000

Questions about this item

How can I confirm the JABSCO 29240-0000 is working correctly after installation?

Operate the handle and verify water moves steadily through the 1 in MHB inlet and discharge at the rated 12 gpm flow without air locks.

What components are included with the JABSCO 29240-0000 and what must be purchased separately?

The pump body, handle and 1 in MHB ports are supplied; hose, clamps and any through-hull fittings are not included.

Which capacity version of the JABSCO 29240-0000 should I choose for my bilge?

This model delivers 12 gpm with a 13 ft self-priming lift; select it when that flow and lift match your bilge volume and hose run.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.