We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze steel tenon adapter, 11-inch spoke bracket with two heads at 180 degrees, 2.5 inch slip fit

J&H LED

J&H LED 11-inch 180° Tenon Adapter 2.5 in. Slip Fit

SKU CH-6A90-JK0VX

Mounts two fixtures at 180° on 2.5 in. poles with 11 in. steel bracket

  • TypeOutdoor Lighting Accessories
  • 11-inch spoke bracket positions two fixtures at 180° for wide-area coverage
  • Slip-fits 2.5 in. pole tops for direct mounting without extra hardware
  • Double-reinforced weld joints and bronze polyester powder coat resist weather and fading
  • Mounts on wood, steel or concrete poles for versatile site installation
  • Dark bronze finish matches standard shoebox, flood and parking-lot fixtures

11-inch 180° Tenon Adapter for Pole Mounting

This 11-inch tenon adapter mounts a single slip-fitter shoebox or flood light onto a 2.5 in. o.d. pole top. The spoke bracket places two heads at 180° for balanced fixture support. Durable steel construction with double reinforced weld joints suits wood, steel or concrete poles. Standard dark bronze polyester powder coating resists fading and weather.

Check pole diameter and fixture mount before

Verify the pole top is round, non-tapered and measures 2.5 in. outside diameter for the slip-fit connection. Confirm the fixture uses a 2-3/8 slip fitter so it seats correctly on the adapter. Ensure the pole material is wood, steel or concrete as the bracket is designed for those substrates. No electrical wiring or driver compatibility is included with this mechanical mount.

Bronze powder coating

The fade-resistant bronze polyester powder coating protects the steel from corrosion in outdoor environments. Double reinforced weld joints add structural strength for long-term fixture support. These features replace weaker single-weld or uncoated brackets that can rust or fail under load. No additional hardware, software or lighting controls are bundled with the adapter.

Highlights

  • 11-inch spoke bracket positions two fixtures at 180° for wide-area coverage
  • Slip-fits 2.5 in. pole tops for direct mounting without extra hardware
  • Double-reinforced weld joints and bronze polyester powder coat resist weather and fading
  • Mounts on wood, steel or concrete poles for versatile site installation
  • Dark bronze finish matches standard shoebox, flood and parking-lot fixtures

Specifications

TypeOutdoor Lighting Accessories

Questions about this item

Does the tenon adapter ship with mounting bolts or do I supply them?

The bracket slips over a 2.5 in. pole top and is secured with its own set screws; no separate bolts are included.

Should I choose a different length or angle for a single shoebox fixture?

This model is fixed at 11 in. with a 180° spoke, purpose-built for one slip-fitter shoebox light.

Will the 180° spoke keep the fixture level on a 2.5 in. steel pole?

The double-reinforced welds and slip-fit design hold the fixture plumb on round steel, aluminium, wood or concrete poles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.