We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided cables with dual 6-pin female and single 8-pin male connectors

J&D JD000914 PCIe Power Adapter Cable Dual 6 Pin Female to 8 Pin Male 9 Inch 2Pack

SKU CH-54WV-0EBM8

Converts two 6-pin power connectors into one 8-pin GPU plug with a 9-inch braided sleeve and 18 AWG wires

  • Length9 feet
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 12 volts; Connector: Male-to-Female
  • Connects 6-pin PSU cables to 8-pin graphics cards for broader GPU compatibility
  • Braided sleeve and 18 AWG tinned copper wires protect conductors and ensure steady power delivery
  • Locking connector prevents accidental disconnection under heavy load
  • 9-inch length gives enough slack for tidy routing inside the case
  • Two adapters included so dual-8-pin cards can be powered from existing 6-pin leads

PCIe power adapter for 8-pin graphics cards

This dual 6-pin female to 8-pin male cable connects an existing power supply to a graphics card requiring an 8-pin connector. It suits builders upgrading a GPU without replacing the PSU. The 2-pack provides a spare or supports cards with dual 8-pin inputs. J&D rates the assembly for 12 volts using 18 AWG tinned copper conductors.

Build integration and cable management

Each adapter measures 9 inches, giving enough reach to route behind the motherboard tray or along the PSU shroud. A braided sleeve protects the wires and keeps the bundle tidy. Locking connectors on both ends prevent accidental disconnection during transport or heavy GPU sag. No extra tools or soldering are required for installation.

Thermals, noise and power delivery

The 18 AWG tinned copper cores handle the rated 12-volt load with minimal resistance, so the adapter itself adds negligible heat. Passive construction means zero fan noise. The secure latch maintains consistent contact under sustained gaming or compute loads, avoiding voltage droop that could destabilise the card.

Highlights

  • Connects 6-pin PSU cables to 8-pin graphics cards for broader GPU compatibility
  • Braided sleeve and 18 AWG tinned copper wires protect conductors and ensure steady power delivery
  • Locking connector prevents accidental disconnection under heavy load
  • 9-inch length gives enough slack for tidy routing inside the case
  • Two adapters included so dual-8-pin cards can be powered from existing 6-pin leads

Specifications

BrandJ&D
ModelJD000914
Length9 feet
Connector DetailMale-to-Female
SpecificationsVoltage: 12 volts; Connector: Male-to-Female

Questions about this item

How much current can the 18 AWG wires carry continuously before they become the limiting factor?

The adapter uses 18 AWG tinned copper conductors rated for 12 V operation, which set the practical current ceiling for sustained loads.

Does the braided sleeve and PVC jacket keep the cable cool and quiet during all-day use?

The flexible PVC jacket and braided sleeve protect the 18 AWG wires and aid heat dissipation, while the passive design adds no fan noise.

What power-supply connectors must already be present to use this dual 6-pin to 8-pin adapter?

Your power supply needs two available 6-pin PCIe connectors to feed the adapter's dual female ends.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.