We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear 25 mL syringe with dual chambers and mixing nozzle

J-B Weld

J-B Weld PlasticWeld Clear 25 mL Syringe 50132

SKU CH-AJ8R-5A0GQ

A two-part epoxy syringe that bonds plastic, metal, glass, ceramic, concrete and fiberglass in five minutes and withstands temperatures up to 250 °F

  • ColorClear
  • Size0.85 oz
  • TypeOther
  • Clear bond blends with transparent plastics
  • 5-minute working time lets you reposition parts
  • Withstands heat up to 250 °F after cure
  • Bonds ceramic, concrete, fiberglass, glass, metal and plastic
  • 25 mL syringe mixes resin and hardener automatically

Clear Epoxy Syringe for Multi-Surface Repairs

J-B Weld PlasticWeld 50132 is a clear, two-part epoxy adhesive packaged in a 25 mL syringe. It bonds ceramic, concrete, fiberglass, glass, metal and plastic for interior or exterior use. The resin and hardener dispense together for a 1:1 mix ratio. Working time is 5 minutes at ambient temperature.

Suited for Small, Precise Bonding Jobs

This format suits DIYers and tradespeople who need a measured amount of adhesive for crack fills, joint repairs or component assembly. The syringe allows controlled placement on vertical or overhead surfaces. Buyers who want a water-resistant marine-grade epoxy or a low-odour formulation should look at something else. Large-area laminating or structural loading beyond the cured strength is not recommended.

Handles Gaps and Moderate Heat After Full Cure

The 0.85 oz cartridge provides enough mixed material for several small repairs or one medium joint. Cured adhesive withstands continuous service up to 250 °F and peaks at 120 °F during application. It is not water-resistant, so prolonged immersion or constant dampness will degrade the bond. Translucent yellow cure colour blends with clear substrates but remains visible on opaque parts.

Highlights

  • Clear bond blends with transparent plastics
  • 5-minute working time lets you reposition parts
  • Withstands heat up to 250 °F after cure
  • Bonds ceramic, concrete, fiberglass, glass, metal and plastic
  • 25 mL syringe mixes resin and hardener automatically

Specifications

BrandJ-B Weld
ColorClear
Size0.85 oz
TypeOther

Questions about this item

Which surfaces must be clean and dry before applying the 25 mL syringe adhesive?

The epoxy bonds ceramic, concrete, fiberglass, glass, metal and plastic; all substrates should be free of dust, grease or moisture before mixing the resin and hardener.

Will the cured joint withstand the 120 °F maximum application temperature of the epoxy?

Yes, the adhesive is rated for continuous service up to 250 °F, so a 120 °F environment is well within its performance range.

How can I confirm the bond has reached full strength after the 5 minute working time?

The joint will turn a translucent yellow when cured; allow it to set undisturbed until the color change is complete and the adhesive feels hard to the touch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.