We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ixirpro thin viscosity CA glue 1.75 oz bottle with microtips pin and extra cap

ixirpro Thin Viscosity CA Glue 1.75 oz Kit

SKU CH-6M0F-7DPWD

Thin 1.75 oz cyanoacrylate kit with five micro-tips flows into hairline cracks and bonds in seconds

  • TypeThin Viscosity ( Flows Like Water)
  • ColorTransparent
  • Thin viscosity flows like water into hairline cracks
  • 75 oz bottle with 5 microtips for precise application
  • Fast 5‑10 second cure with activator spray
  • Bonds wood, plastic, models and 3D prints
  • Transparent finish leaves repairs nearly invisible

Thin Viscosity Cyanoacrylate Kit

This 1.75 oz kit supplies ultra-low viscosity cyanoacrylate glue that flows like water into hairline cracks and tight seams. It is intended for woodworkers, model builders, crafters and 3D-printing enthusiasts who need precise penetration without excess buildup. The package includes the adhesive, five microtips, a pin, a lid and an extra cap for controlled dispensing.

Sustained Bonding Behaviour

With a 2-5 CPS rating the glue penetrates micro voids continuously rather than bridging gaps in a single burst. Full cure reaches up to 30 seconds without accelerator and can drop to 5-10 seconds when a CA activator spray is used. The thin formula remains stable during extended clamping or assembly sequences, allowing repositioning only during the initial few seconds.

Installation Practicalities

Application requires only two to three drops per square inch on one surface, so the learning curve is minimal. The included microtips and pin keep the nozzle clear, while the spare cap prevents the bottle from clogging between sessions. Users who need gap-filling viscosity or slower open time for large-area laminations will find this thin formula unsuitable.

Highlights

  • Thin viscosity flows like water into hairline cracks
  • 75 oz bottle with 5 microtips for precise application
  • Fast 5‑10 second cure with activator spray
  • Bonds wood, plastic, models and 3D prints
  • Transparent finish leaves repairs nearly invisible

Specifications

Brandixirpro
TypeThin Viscosity ( Flows Like Water)
ColorTransparent

Questions about this item

Does the thin viscosity generate noticeable fumes or heat during long modelling sessions?

The low-viscosity cyanoacrylate cures in seconds and does not produce measurable heat; normal workshop ventilation is sufficient for extended use.

What extra items are needed to reach the 5-10 second cure time stated for this glue?

A separate CA glue activator spray is required to achieve the 5-10 second cure; without it full curing can take up to two minutes.

Will the 1.75 oz bottle and included microtips work with the older wood-turning lathe and pen kits I already own?

Yes — the thin formula penetrates hairline cracks in turned blanks and the five microtips give precise control for pen assemblies and inlay work.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.