iworkmart
iworkmart 12V Dual USB QC 3.0 Car Charger 2 Pack
A two-pack of 12 V dual USB QC 3.0 sockets with physical power switches, 10 A inline fuses and 3.3 ft wiring for car, boat or RV installations
- TypeCar Charger
- Two-device fast charging with dual QC 3.0 ports
- Safer operation via 10 A inline fuses and heat-resistant housing
- Reliable on/off control with momentary physical switch
- Ready for 12 V vehicles, boats and RVs
- Includes two outlets, four terminals and 3.3 ft wire
Dual USB QC 3.0 car charger 2-pack
This pack supplies two 12 V sockets, each with dual Quick Charge 3.0 ports for phones, tablets, cameras and similar USB devices. It is aimed at drivers who want faster charging for two devices at once without using a laptop-grade supply.
12 V wiring with inline fuses and physical switch
Each outlet connects to a 12 V system using the included 3.3 ft wire and insulated terminals, with a 10 A inline fuse for overload protection. A momentary physical power switch cuts current completely, avoiding the random on-off behaviour seen with touch switches and saving battery when the vehicle is parked.
Two ports per outlet, up to 4× conventional speed
The dual QC 3.0 ports charge compatible handsets and tablets simultaneously at up to four times the speed of standard 5 V charging. Laptops such as Lenovo, HP, Dell or MacBook models are not supported, so buyers needing mobile workstation power must look elsewhere.
Highlights
- Two-device fast charging with dual QC 3.0 ports
- Safer operation via 10 A inline fuses and heat-resistant housing
- Reliable on/off control with momentary physical switch
- Ready for 12 V vehicles, boats and RVs
- Includes two outlets, four terminals and 3.3 ft wire
Specifications
| Type | Car Charger |
|---|
Questions about this item
How much current can the 10 A inline fuse handle before it blows?
The 10 A inline fuse protects the circuit from overloads by cutting power when current exceeds 10 A.
Does the momentary power switch prevent the unit from drawing current when the vehicle is parked?
Yes, the physical momentary switch breaks the circuit completely so no standby current is drawn while the vehicle is off.
What voltage source is required for the dual QC 3.0 ports to operate?
A 12 V DC supply such as a car, boat or RV electrical system is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



