We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 12V car charger splitter with three cigarette lighter sockets, USB-C, QC3.0 and two USB-A ports

iworkmart

iworkmart 12V 200W 3-Socket Car Charger Splitter Red

SKU CH-7BFJ-2JGT8

A 12-24 volt splitter with three sockets, USB-C PD 30W, QC 3.0 18W, two 5V 2.4A ports and an LED voltage display

  • TypeCar Charger
  • Charge seven devices at once with one Type-C PD 30W, one QC 3.0 18W, two 5V 2.4A USB ports and three 12V sockets
  • Delivers up to 120W on 12V systems and 200W on 24V systems for high-draw accessories
  • Built-in LED voltage display shows real-time battery status and flashes a low-voltage warning
  • Master power switch cuts supply to all ports instantly without unplugging the adapter
  • Eyelet terminals allow direct battery connection for a permanent auxiliary 12-24V outlet

7-in-1 Car Power Hub

This iworkmart splitter turns a single 12‑24 volt socket into three cigarette‑lighter ports plus four USB outputs. It delivers up to 120 watts at 12 volts or 200 watts at 24 volts and includes an eyelet terminal for direct battery connection. A built‑in smart IC detects attached devices and allocates the fastest supported charge. An LED voltage display and master power switch complete the unit.

For Multi‑Device Drivers, Not Minimalists

Drivers who run a dash cam, GPS, phone, tablet and heated seat at once will use every port and the 30‑watt Type‑C PD plus 18‑watt QC3.0 output. Commuters who only need a single phone charger gain no benefit from the extra sockets and display. Vehicles limited to very low accessory fuses may trip before the splitter reaches its rated output.

Fits 12‑24V Systems, Frees Up Socket Space

The adapter plugs into any standard 12‑24 volt cigarette lighter or clamps via eyelet terminals to the battery, requiring no special wiring or tools. It consolidates seven charging points into one location, eliminating the need for multiple separate adapters. The master switch cuts power to all ports at once, preventing parasitic drain when the vehicle is parked.

Highlights

  • Charge seven devices at once with one Type-C PD 30W, one QC 3.0 18W, two 5V 2.4A USB ports and three 12V sockets
  • Delivers up to 120W on 12V systems and 200W on 24V systems for high-draw accessories
  • Built-in LED voltage display shows real-time battery status and flashes a low-voltage warning
  • Master power switch cuts supply to all ports instantly without unplugging the adapter
  • Eyelet terminals allow direct battery connection for a permanent auxiliary 12-24V outlet

Specifications

TypeCar Charger

Questions about this item

What power source does the iworkmart 12V 200W 3-Socket Car Charger Splitter need to operate?

It plugs into a standard 12-24 volt vehicle cigarette lighter socket or connects directly to a 12-24 volt battery via the included eyelet terminals.

Will my older 12V accessories like a dash cam or GPS receiver work with the three cigarette lighter sockets on this splitter?

Yes, the three sockets deliver up to 120W at 12V, so legacy 12V devices such as dash cams, GPS units, seat heaters or air purifiers will run normally.

How can I confirm the iworkmart splitter is functioning correctly once installed?

The built-in LED voltage display shows real-time battery voltage; if it lights steadily without flashing, the unit is powered and the master switch is on.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.