iTekiro
iTekiro 65W AC Adapter for HP Split 13 x2
A 65 W AC adapter with 6 ft cords that powers and charges compatible HP Split 13 x2 laptops from 100–240 V mains
- TypeAC Adapter
- Battery TypeLithium-Ion
- AC Adapter Voltage19.5V
- AC Adapter Current3.34A
- AC Adapter Output Power65W
- Reach distant outlets easily with two 6 ft cords included
- Protects laptop from voltage spikes and surges with UL-listed safety
- Delivers consistent 65 W power at 19.5 V and 3.34 A
- Rugged sealed case resists moisture and humidity in mobile use
- Works worldwide on 100–240 V input without a voltage converter
Power and compatibility
This 65W AC adapter powers compatible HP Split 13 and x2 laptops while charging the internal lithium-ion battery. It replaces original 45W and 65W chargers but does not replace 90W units. The adapter accepts worldwide AC input from 100 to 240V at 50 to 60Hz and delivers 19.5VDC at 3.34A.
Thermals and safety
A ruggedised case resists moisture and high humidity while internal protection circuits filter voltage spikes and limit output voltage or current. High power efficiency provides consistent and continuous power during normal use. The UL-listed AC power cord adds an extra layer of electrical safety.
Build integration
The package includes a 6 ft 2-prong AC cord and a 6 ft DC cord for extended reach without extension leads. The compact brick measures 4.25 by 1.89 by 1.18 inches and weighs 10.8 oz. Buyers needing a 90W power supply or a different connector type should look elsewhere.
Highlights
- Reach distant outlets easily with two 6 ft cords included
- Protects laptop from voltage spikes and surges with UL-listed safety
- Delivers consistent 65 W power at 19.5 V and 3.34 A
- Rugged sealed case resists moisture and humidity in mobile use
- Works worldwide on 100–240 V input without a voltage converter
Specifications
| Type | AC Adapter |
|---|---|
| Battery Type | Lithium-Ion |
| AC Adapter Voltage | 19.5V |
| AC Adapter Current | 3.34A |
| AC Adapter Output Power | 65W |
Questions about this item
How do I connect the iTekiro 65W adapter to my HP Split 13 x2, and what step is often missed?
Plug the 6 ft 2-prong AC cord into a 100-240V 50-60Hz outlet, then connect the 6 ft DC cable to the laptop; the step often missed is verifying the laptop requires 19.5V 3.34A 65W and not a 90W unit.
What part of this adapter will need replacement first during its service life?
The 6 ft DC output cable and its connector endure repeated bending and are the most likely components to wear out before the ruggedised case or internal circuitry.
What is the first limitation reached when the adapter runs at full 65W load for long periods?
The 65W maximum output ceiling is the hard limit; sustained loads at or above 65W will trigger the internal protection that limits output voltage and current.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



