iTekiro
iTekiro 65W 19.5V 3.34A Car Charger for HP N9E38UA
A 65W DC car charger delivering 19.5V at 3.34A to power and charge compatible HP laptops from a 12–24V vehicle socket, with short-circuit and over-temperature protection
- TypeAuto Adapter
- Battery TypeLithium-Ion
- AC Adapter Voltage19.5V
- AC Adapter Current3.34A
- AC Adapter Output Power65W
- Powers laptop in vehicle via 12-24V DC input
- Replaces HP 45W and 65W adapters with 65W output
- circuit and over-temperature protection included
- Compact 4.33" x 1.69" x 1.18" design weighs 9.7 oz
- Long power cord extends reach inside the vehicle
HP Car Charger Compatibility
The iTekiro 65W auto adapter powers compatible HP laptops from a 12V or 24V vehicle socket. It delivers 19.5V at 3.34A, replacing original 45W and 65W HP adapters. The unit includes short-circuit and over-temperature protection plus an LED indicator. A long cord allows flexible placement inside the cabin.
Suitable Vehicles And Limits
Drivers of cars or trucks with a standard cigarette-lighter outlet can charge supported HP notebooks while travelling. It does not replace 90W HP adapters, so laptops requiring that higher input will not operate correctly. Buyers needing an AC wall adapter or a higher-wattage DC solution should look elsewhere.
Deciding Specification
The critical figure is the 65W maximum output at 19.5V 3.34A. Match this exactly to the laptop's required input; if the device demands 90W the charger will be insufficient. Input range is DC 12V to 24V, covering most vehicle electrical systems.
Highlights
- Powers laptop in vehicle via 12-24V DC input
- Replaces HP 45W and 65W adapters with 65W output
- circuit and over-temperature protection included
- Compact 4.33" x 1.69" x 1.18" design weighs 9.7 oz
- Long power cord extends reach inside the vehicle
Specifications
| Type | Auto Adapter |
|---|---|
| Battery Type | Lithium-Ion |
| AC Adapter Voltage | 19.5V |
| AC Adapter Current | 3.34A |
| AC Adapter Output Power | 65W |
Questions about this item
What size is the DC plug on this 19.5V 3.34A car charger?
The unit measures 4.33" x 1.69" x 1.18" and weighs 9.7 oz; the DC output cable terminates in a barrel connector sized for the listed HP models
How do I install the iTekiro 65W auto adapter in my vehicle?
Plug the input end into a 12-24V cigarette lighter socket, connect the output barrel tip to the laptop, then confirm the LED indicator lights; the step often missed is verifying the socket supplies power with the ignition on
When should I replace the fuse or cable on this 65W car charger?
Replace the internal fuse if the LED fails to light and the vehicle socket tests live; inspect the long power cord for fraying after extended use and swap the unit if insulation damage appears
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



