iTekiro
iTekiro 4 ft NEMA 1-15P to C7 IEC Power Cord 18 AWG
A 4 ft non-polarised cord with NEMA 1-15P male and IEC C7 female connectors, rated 125 V and 7 A using 18 AWG wire
- TypeUniversal
- Length4'
- Non-polarised C7 connector fits laptops and AV gear without orientation hassle
- NEMA 1-15P male plugs straight into standard North American wall outlets
- 4 ft (1.2 m) length keeps desk setups tidy without excess slack
- 18 AWG conductors rated for 7 A at 125 V deliver reliable power to low-draw devices
- Two-conductor design matches original equipment cords for direct replacement compatibility
Direct Replacement Cord
This four-foot non-polarised cord connects laptops, VCRs and similar A/V gear that use a two-slot C7 inlet to a standard NEMA 1-15P wall outlet. The 18 AWG conductors are rated for 7 A at 125 V.
Simple Two-Prong Build
A moulded NEMA 1-15P male plug and an IEC320 C7 female connector snap together without polarity concerns, so orientation never matters when plugging in. The 1.2 m length keeps desktop clutter low while reaching nearby sockets.
Swaps Worn Or Lost Leads
It replaces a damaged or missing original lead for any device accepting a non-polarised C7 connection. The jump is worth it when the existing cable is frayed, the plug is loose or a spare is needed for travel.
Highlights
- Non-polarised C7 connector fits laptops and AV gear without orientation hassle
- NEMA 1-15P male plugs straight into standard North American wall outlets
- 4 ft (1.2 m) length keeps desk setups tidy without excess slack
- 18 AWG conductors rated for 7 A at 125 V deliver reliable power to low-draw devices
- Two-conductor design matches original equipment cords for direct replacement compatibility
Specifications
| Brand | iTEKIRO |
|---|---|
| Type | Universal |
| Length | 4' |
Questions about this item
What does the NEMA 1-15P to IEC C7 connection limit in practice?
The cord is rated for 125 V and 7 A, suitable for non-polarised laptop or AV equipment.
What clearance does the 4 ft 18 AWG cable need to fit?
The 1.2 m length with 18 AWG conductors fits standard outlet spacing and device inlets without strain.
How is the non-polarised C7 connector installed, and what step is often missed?
Align the figure-8 plug with the device inlet and push fully home; the non-polarised design means either orientation works.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



