iTekiro
iTekiro 180W power inverter for MSI Katana GF66 12UD-015
180 W AC adapter with 4.5 mm centre-pin plug for MSI Katana GF66 and GF76 models
- 180 W output keeps the laptop running at full load
- 5 mm centre-pin tip matches the Katana charging port
- 100–240 V input works on mains worldwide
- 6 ft AC plus 6 ft DC cords give flexible placement
- Overload, short-circuit, over-voltage and thermal protections safeguard the system
180W AC adapter for MSI Katana laptops
This 180W power inverter replaces the original charger for MSI Katana GF66 and GF76 models including 12UD-015, 12UD-436, 11UE and 12UD-005 variants. It supplies 19.5 V at 9.23 A, 19 V at 9.5 A or 20 V at 8 A for full system operation. The unit accepts 100–240 V input at 50–60 Hz for worldwide use.
4.5 mm centre-pin connector fits listed Katana
The adapter uses a 4.5 mm plug tip with a centre pin that matches the DC-in jack on the specified Katana GF66 and GF76 chassis. Compatibility is limited to the exact model numbers shown in the supplier data. Laptops with a different barrel size or pin layout cannot use this adapter.
180 W maximum output handles high-load gaming
At 180 W the inverter runs the CPU and discrete GPU under load while simultaneously charging the battery. Systems that draw more than 180 W peak power will exceed the adapter capacity and may throttle or drain the battery during heavy workloads.
Highlights
- 180 W output keeps the laptop running at full load
- 5 mm centre-pin tip matches the Katana charging port
- 100–240 V input works on mains worldwide
- 6 ft AC plus 6 ft DC cords give flexible placement
- Overload, short-circuit, over-voltage and thermal protections safeguard the system
Specifications
No published specifications for this item yet.
Questions about this item
Will the 180 W rating actually run a Katana GF66 under full GPU load?
The adapter delivers up to 180 W at 19.5 V and 9.23 A, matching the laptop's peak demand so the GPU can sustain boost clocks without throttling.
Does the 100–240 V input auto-switch for travel, or do I need a voltage selector?
The wide-range input accepts 100–240 V at 50–60 Hz automatically, so only a local plug adapter is required abroad.
Will the 4.5 mm centre-pin tip fit the charging port on my GF76 12UD?
Yes, the 4.5 mm barrel with centre pin is the exact connector used on the listed Katana GF66 and GF76 models.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



