iTekiro
iTekiro 150W 19.5V 7.7A AC Adapter 4.5mm Pin
150W AC adapter with 4.5 mm centre-pin tip, 19.5V 7.7A output and extra-long 6 ft cords replaces 120W HP chargers
- TypeAC Adapter
- Battery TypeLithium-Ion
- AC Adapter Voltage19.5V
- AC Adapter Current7.7A
- AC Adapter Output Power150W
- Delivers up to 150 W for demanding laptops
- 5 mm centre-pin plug fits listed HP models
- Extra-long 6 ft AC and 6 ft DC cables
- Worldwide 100–240 V input for travel use
- Built-in overload, short-circuit and over-voltage protection
150W 19.5V AC Adapter with 4.5mm Pin
This iTekiro AC adapter delivers 150 watts at 19.5 volts and 7.7 amps for compatible HP laptops. It fits models such as the 15-j series, 16-a series, 16-e series, 16-f series and 16-h series. The 4.5 mm plug tip includes a centre pin for a secure connection. It replaces original 150W or 120W chargers but not higher-wattage units.
Thermals, Noise and Power Draw
The adapter accepts worldwide AC input from 100 to 240 volts at 50 to 60 hertz. Built-in safety circuits provide overload protection, short-circuit protection and over-voltage, over-current and over-temperature protection. A durable case resists extreme conditions and seals out water and humidity for steady operation.
Upgrade Context and Limits
This unit replaces an original 150W or 120W charger for the listed HP notebooks. It does not replace 180W, 200W or 230W adapters, so systems requiring those higher ratings are not supported. The package includes a 6 ft UL-listed 3-prong AC cord and a 6 ft DC cord for flexible placement. Buyers needing a higher-wattage supply should look elsewhere.
Highlights
- Delivers up to 150 W for demanding laptops
- 5 mm centre-pin plug fits listed HP models
- Extra-long 6 ft AC and 6 ft DC cables
- Worldwide 100–240 V input for travel use
- Built-in overload, short-circuit and over-voltage protection
Specifications
| Type | AC Adapter |
|---|---|
| Battery Type | Lithium-Ion |
| AC Adapter Voltage | 19.5V |
| AC Adapter Current | 7.7A |
| AC Adapter Output Power | 150W |
Questions about this item
How do I install the 4.5 mm pin tip adapter and what step do people miss?
Connect the 6 ft DC cord to the adapter brick, insert the 4.5 mm pin tip firmly until it clicks into the laptop port, then plug the 6 ft UL listed 3-prong AC cord into a 100-240V outlet; the step often missed is fully seating the pin tip so the centre pin makes contact.
What maintenance or replacement will this 150W 19.5V 7.7A adapter need later?
The adapter itself has no user-serviceable parts; inspect the 6 ft AC and DC cords periodically for wear, keep the brick vents clear of dust, and replace the unit if output drops below 150W or the pin tip becomes loose.
What limit appears first when this adapter runs at full 150W load for long periods?
The over-temperature protection will trigger first, shutting the unit down until it cools; this prevents damage during sustained 19.5V 7.7A operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



