We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular battery checker with XT60 balance ports and USB output

ISDT BG-8S Smart Battery Checker 12V 2A

SKU CH-0HFJ-NEX6J

Handheld 12 V 2 A battery checker measures 2-8S packs, balances cells, tests receiver signals and powers USB devices via XT60 or XT60i

  • FeaturesQualcomm, Battery Powered, false
  • Height3 L x 2 W x 1 H inches
  • Width3 L x 2 W x 1 H inches
  • Length3 L x 2 W x 1 H inches
  • Weight0.2 pounds
  • TypeVoltmeter
  • Measures 2-8S LiHv LiPo Li-ion LiFe NiMH NiCd via XT60 XT60i balance ports
  • BattGO reads cell voltage cycles parameters through XT60i smart battery connection
  • Auto balance algorithm equalises cells then enters low power mode
  • Power bank outputs 12V 2A QC 2.0 3.0 BC1.2 Apple devices
  • Tests BEC voltage analyses PWM PPM S.BUS receiver signals

All-in-one battery tool for RC hobbyists

The ISDT BG-8S Smart Battery Checker combines voltage measurement, cell balancing, receiver signal testing and USB power-bank operation in a single handheld unit. It targets RC pilots and drivers who manage LiHv, LiPo, Li-ion, LiFe or NiMH/NiCd packs from 2S to 8S and want one device for field checks and charging phones.

Compact build with XT60, balance and USB ports

The enclosure measures 3 L x 2 W x 1 H inches and weighs 0.2 pounds, so it fits easily in a flight bag. Connections include XT60 and XT60i for main leads, a 2-8S balance port for per-cell data, a standard three-pin plug for BEC voltage checks and a USB output that delivers up to 12V 2A using Qualcomm QC 2.0/3.0 and BC1.2 protocols. BattGO technology adds detailed pack history when an XT60i smart battery is connected.

12V 2A USB output decides power-bank usefulness

Maximum output is 12V at 2A, which determines how quickly the unit can charge phones, tablets or other USB gear from a connected flight pack. If your devices need higher voltage or current, this checker will not meet that requirement.

Highlights

  • Measures 2-8S LiHv LiPo Li-ion LiFe NiMH NiCd via XT60 XT60i balance ports
  • BattGO reads cell voltage cycles parameters through XT60i smart battery connection
  • Auto balance algorithm equalises cells then enters low power mode
  • Power bank outputs 12V 2A QC 2.0 3.0 BC1.2 Apple devices
  • Tests BEC voltage analyses PWM PPM S.BUS receiver signals

Specifications

BrandISDT, Shenzhen ISD Technology Co., Ltd
FeaturesQualcomm, Battery Powered, false
Height3 L x 2 W x 1 H inches
Width3 L x 2 W x 1 H inches
Length3 L x 2 W x 1 H inches
Weight0.2 pounds
TypeVoltmeter

Questions about this item

What balance-port range does the BG-8S support for cell measurements?

It measures 2-8S balance connectors across LiHv, LiPo, Li-ion, LiFe, NiMH and NiCd chemistries.

Which connectors are required to mount the unit to a battery?

XT60 or XT60i for main power and a 2-8S balance plug for per-cell data.

How is BattGO data activated on the checker?

Plug the battery's XT60i connector into the unit; the BattGO firmware then reads cycles, cell voltages and parameters automatically.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.