Ironclad KKCA5-02-S cut-resistant coated gloves, A5, nitrile, S, 1 pair

Ironclad KKCA5-02-S cut-resistant gloves

The Ironclad KKCA5-02-S gloves deliver ANSI/ISEA Cut Level A5 protection for workers handling sharp materials in automotive, construction or general industrial tasks. A seamless HPPE knit liner provides dexterity while the nitrile palm coating supplies grip in dry or light-oil conditions. The knit cuff holds the glove securely without restricting wrist movement. These are sold as a single pair in size small.

Upgrading from lower cut-level hand protection

Moving from A1 to A4 gloves to this A5 model is justified when tasks involve heavier sheet metal, glass edges or slitting tools that defeat lighter shells. The ANSI/ISEA Impact Level 2 rating adds back-of-hand protection absent on many palm-only coated gloves. If your current gloves wear through the coating quickly, the nitrile finish here resists abrasion longer than basic polyurethane alternatives. Workers who do not face impact hazards or need touchscreen function will not gain extra value from those missing features.

Check fit and coating compatibility before ordering

Verify that size small matches your hand measurements, as an oversized glove reduces cut resistance at the fingertip. Confirm that nitrile coating suits your environment; it performs well in oil but degrades in strong solvents or high-heat applications. The gloves are unlined and non-insulated, so they are unsuitable for cold-store or hot-metal handling. Ensure ANSI 105 and EN 388:2016 standards satisfy your site safety requirements.