We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of grey seamless knit gloves with black nitrile palm coating size XL

Ironclad

Ironclad KKC5B-05-XL Cut Resistant Coated Gloves A3 Cut

SKU CH-766G-Z6RSJ

Cut-resistant gloves with nitrile palm coating, ANSI cut level A4 and impact level 1 protection

  • ANSI A4 cut resistance protects against sharp edges
  • ANSI/ISEA Impact Level 1 shields knuckles from bumps
  • Nitrile palm coating gives secure grip in oily conditions
  • Seamless knit liner reduces hand fatigue during long shifts
  • Silicone-free construction prevents contamination of painted surfaces

Ironclad A4 Cut-Resistant Gloves

The Ironclad KKC5B-05-XL is a seamless knit glove with a nitrile palm coating designed for hand protection. It meets ANSI/ISEA Cut Level A4 and EN 388:2016 standards for cut resistance. The palm-side coverage and ANSI/ISEA Impact Level 1 rating suit workers handling sharp or abrasive materials. The knit cuff keeps debris out during use.

Unlined HPPE Liner and Nitrile Coating

The high-performance polyethylene liner provides cut resistance without insulation, maintaining dexterity in warm conditions. A nitrile coating on the palm enhances grip on dry or lightly oily surfaces and resists abrasion. The gloves are silicone-free to prevent contamination of sensitive finishes. Touchscreen compatibility is not included, so devices must be operated bare-handed.

Check Standards and Coating Needs

Verify that ANSI 105 A4 cut protection matches the hazard assessment for your task. Confirm that a palm-only coating is sufficient; the back of the hand has no coating. Ensure the knit cuff length fits under your sleeve without gaps. Buyers needing touchscreen operation, insulated liners, or back-of-hand impact protection should select a different model.

Highlights

  • ANSI A4 cut resistance protects against sharp edges
  • ANSI/ISEA Impact Level 1 shields knuckles from bumps
  • Nitrile palm coating gives secure grip in oily conditions
  • Seamless knit liner reduces hand fatigue during long shifts
  • Silicone-free construction prevents contamination of painted surfaces

Specifications

BrandIRONCLAD PERFORMANCE WEAR

Questions about this item

How often should the nitrile coating on the palm be inspected for wear?

Inspect the nitrile palm coating regularly; replace the gloves once the coating shows abrasion or the HPPE liner becomes visible to maintain A4 cut protection.

What limits how long these can be worn continuously in hot conditions?

The unlined HPPE construction and nitrile coating trap body heat, so heat buildup inside the glove becomes the limiting factor during all-day wear.

Do the gloves get slippery or stiff after hours of exposure to oils and sweat?

The silicone-free nitrile coating resists oil absorption and stays flexible, maintaining grip and dexterity throughout a full shift.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.