We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of large impact gloves with grey knit back and black foam nitrile palm coating

Ironclad

Ironclad INDI-KC5G-04-L Impact Gloves, Foam Nitrile Palm, L

SKU CH-ZY6E-TSDW5

Seamless knit HPPE, nylon and spandex gloves with foam nitrile palm coating, ANSI/ISEA Cut Level A3 and Impact Level 2 protection

  • ANSI/ISEA Impact Level 2 protects knuckles from crushing blows
  • ANSI/ISEA Cut Level A3 shields the palm side against sharp edges
  • Seamless HPPE, nylon and spandex back delivers dexterity without bulky seams
  • Foam nitrile palm coating maintains grip in oily or wet conditions
  • Silicone-free construction prevents contamination of paint or finish work

Ironclad Impact Gloves Level 2

These Ironclad gloves provide ANSI/ISEA Impact Level 2 protection for the back of the hand. The seamless knit construction uses HPPE, nylon and spandex for a close fit. A foam nitrile palm coating delivers grip in dry and light oil conditions. They are sold as a single pair in size L.

Sustained wear comfort and protection

The unlined, breathable knit back reduces heat build-up during long shifts. Seamless construction removes pressure points that can cause fatigue over time. Silicone-free materials prevent surface contamination on sensitive workpieces. ANSI 105 and EN 388:2016 ratings confirm consistent cut and abrasion resistance.

Check fit and task requirements

Verify that size L matches your hand measurements before ordering. Confirm ANSI/ISEA Impact Level 2 meets the safety specification for your application. Note the gloves are not insulated and offer no touchscreen compatibility. Cut-resistance coverage is limited to the palm side only.

Highlights

  • ANSI/ISEA Impact Level 2 protects knuckles from crushing blows
  • ANSI/ISEA Cut Level A3 shields the palm side against sharp edges
  • Seamless HPPE, nylon and spandex back delivers dexterity without bulky seams
  • Foam nitrile palm coating maintains grip in oily or wet conditions
  • Silicone-free construction prevents contamination of paint or finish work

Specifications

BrandIRONCLAD PERFORMANCE WEAR

Questions about this item

How warm do the HPPE and nitrile layers feel after a full shift?

The seamless knit back uses HPPE, nylon and spandex without insulation, so heat builds only from your own hand temperature.

What must I already have to meet the ANSI/ISEA Impact Level 2 rating?

The gloves themselves provide the rated palm-side impact protection; no extra guards or liners are required.

Can I wear these with older cut-resistant sleeves rated to EN 388:2016?

Yes, the gloves meet EN 388:2016 and ANSI 105, so they pair with sleeves certified to the same 2016 standard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.