We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic bath waste and overflow kit with stainless steel strainer and grate

IPS CORPORATION

IPS CORPORATION AB&A 60354 Bath Waste & Overflow Kit

SKU CH-B9T3-PAACE

PVC bath waste and overflow kit with push eN lift stopper includes strainer and stainless steel grate

  • TypeOther
  • Meets CSA and IAPMO standards for safe drainage
  • Push eN Lift stopper allows easy open-close operation
  • Solvent-weld PVC connections create watertight joints
  • Stainless-steel grate resists corrosion and looks clean
  • Complete half-kit includes strainer and waste components

Product Identity

The IPS Corporation AB&A 60354 is a bath waste and overflow kit designed for residential bathtub installations. It suits homeowners and plumbers fitting or replacing drainage assemblies in standard tubs. The kit includes the waste shoe, overflow faceplate and a push eN lift stopper for drain control. It is not intended for commercial or ligature-resistant applications.

Installation & Standards

The assembly connects via solvent-weld joints to 1 1/2 inch nominal plastic pipe and meets CSA and IAPMO standards. A stainless-steel grate and strainer are included to catch debris while allowing normal water flow. The flange diameter is 2 7/8 inches with a body diameter of 2 1/2 inches. No ligature-resistant features are provided.

Deciding Specification

The connection type is solvent weld, which requires PVC or ABS pipe and compatible cement for a permanent joint. Buyers with existing compression or threaded drain connections cannot use this kit without re-piping. The push eN lift stopper operates mechanically and does not suit overflow-only or pop-up conversion needs.

Highlights

  • Meets CSA and IAPMO standards for safe drainage
  • Push eN Lift stopper allows easy open-close operation
  • Solvent-weld PVC connections create watertight joints
  • Stainless-steel grate resists corrosion and looks clean
  • Complete half-kit includes strainer and waste components

Specifications

BrandAB&A
TypeOther

Questions about this item

How do you solvent-weld the 1 1/2 in PVC connections on the AB&A 60354 waste and overflow kit, and what step is often missed?

Dry-fit all joints first, then apply primer and cement to both pipe and fitting; the step often missed is holding each joint firmly for the full cure time so the solvent weld does not pull apart.

Which component of the AB&A 60354 kit will need replacement first under normal use?

The push eN lift stopper mechanism sees the most cycles and its seals typically wear before the PVC body or stainless-steel grate.

What is the first limitation you hit when running high-volume drainage through the AB&A 60354 continuously?

The 1 1/2 in nominal pipe size restricts flow rate before the PVC material or the solvent-welded joints reach any thermal or pressure limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.