We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-C front panel adapter cable with silver PCI bracket and two slot covers

IOGEAR XE00150744_80jhDioi USB-C front panel adapter cable 19.7in with PCI bracket

SKU CH-0SS6-ZP9AV

Adds a front-panel USB-C port at up to 20 Gbps via a 20-pin Type-E motherboard header and includes a PCI bracket with two slot covers

  • TypeUSB
  • Connector TypeUSB C
  • Cable Length6 ft.
  • Length< 6 ft.
  • Connector Number16
  • Apple CompatibleLightning connector
  • 20 Gbps data speed with USB 3.2 Gen 2x2 host controller
  • Front-panel USB-C port connects phones drives and peripherals
  • Metal PCI bracket and PVC cable resist bending and debris
  • 50 cm cable reaches most case layouts without strain
  • Driver-free 20-pin Type-E A-Key header installs in minutes

Front-panel USB-C adapter for case builders

This USB 3.2 Gen 2x2 adapter adds a front-panel USB-C port to a desktop case. It connects a motherboard 20-pin Type-E header to a panel-mounted USB-C female connector. The kit includes a metal PCI bracket and two slot covers for secure installation. Builders who need internal headers only will not use this part.

20 Gbps speed requires Gen 2x2 host controller

The cable supports data transfers up to 20 Gbps when the motherboard provides a dedicated USB 3.2 Gen 2x2 host controller. Without that controller the link will negotiate a lower rate. The 20-pin A-key male connector is clearly labelled to prevent misalignment during installation. No drivers or software are required for operation.

Passive cable draws negligible power and runs silent

The 50 cm PVC-insulated cable carries only signal and bus power, adding no measurable heat or noise inside the chassis. Metal bracket and connector shells provide shielding and mechanical stability. The assembly installs in minutes and requires no active cooling or additional power connections.

Highlights

  • 20 Gbps data speed with USB 3.2 Gen 2x2 host controller
  • Front-panel USB-C port connects phones drives and peripherals
  • Metal PCI bracket and PVC cable resist bending and debris
  • 50 cm cable reaches most case layouts without strain
  • Driver-free 20-pin Type-E A-Key header installs in minutes

Specifications

BrandIOGEAR
ModelXE00150744_80jhDioi
TypeUSB
Connector TypeUSB C
Cable Length6 ft.
Length< 6 ft.
Connector Number16
Apple CompatibleLightning connector
SpecificationsUSB Type C, 19.7, inches, XE00150744_80jhDioi, Qulkws
FeaturesUSB Type C
Disclaimernot_applicable

Questions about this item

What does the 20Gbps figure mean once the adapter is installed in my PC?

The 20Gbps rating is the maximum theoretical bandwidth of the USB 3.2 Gen 2x2 link. You will only reach that speed if your motherboard has a dedicated USB 3.2 Gen 2x2 host controller; otherwise the connection runs at the controller's lower limit.

What interface does the 20-pin Type-E A-Key male connector use and what does it cap in practice?

The 20-pin Type-E A-Key male connector plugs into a USB 3.2 Gen 2x2 motherboard header. In practice the link is capped at 20Gbps and requires a matching Gen 2x2 controller to hit that ceiling.

What does the adapter physically need to fit and mount in my case?

You need a free PCI slot opening for the 12cm metal bracket and two PCI slot covers. The 50cm (19.7in) cable routes from the motherboard's 20-pin Type-E header to that bracket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.