We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Desktop 4-color 1-station screen printing press with rotary frame holders and 22x18 platen

Intsupermai

Intsupermai SPE-A411Z 4 Color 1 Station Printmaking Press

SKU CH-E82A-J3MM1

A four-colour single-station screen-printing press with a 360-degree rotating frame holder, adjustable spring tension and a 22x18x.7 inch platen for T-shirt overprinting

  • TypePrinting Presses
  • 4-colour overprinting on one station
  • 360° rotating screen holders with detent registration
  • Spring-tension balance for varying frame weights
  • 22x18x.7 inch platen with pitted glue surface
  • Combination frame ships flat with full tool kit

Intsupermai SPE-A411Z 4 Colour Press

The Intsupermai SPE-A411Z is a four-colour, single-station screen printing press built for tabletop use. It is designed for manual registration and overprinting on T-shirts and similar flat garments. The unit ships as a combination structure suited to express delivery and includes a full set of installation tools.

Hobbyists and small studios doing multi-colour

This press suits users who need to align up to four screens on one platen for short runs or prototype work. It is not for buyers who want automatic indexing, high-volume production speeds, or a floor-standing unit with a larger print area.

Table mounting with supplied tools

The machine must be fixed to a sturdy table and assembled using the provided hardware and instructions. Screen frames clamp in chucks that rotate 360 degrees and adjust vertically within a 1.6 inch range. Spring tension is set by screws to balance frame weight. Common issues include achieving precise registration across all four stations and ensuring the platen is securely mounted with the self-tapping screws.

Highlights

  • 4-colour overprinting on one station
  • 360° rotating screen holders with detent registration
  • Spring-tension balance for varying frame weights
  • 22x18x.7 inch platen with pitted glue surface
  • Combination frame ships flat with full tool kit

Specifications

TypePrinting Presses

Questions about this item

What size table or bench do I need to bolt the SPE-A411Z press onto?

The press is a table-type unit that must be fixed to a sturdy work surface. Allow at least the 55 cm by 45 cm platen footprint plus clearance for the 360-degree rotating screen arms and the 20 cm wide chuck on each of the four stations.

Can I keep using my existing 20 cm wide screens that are 4 cm thick with this press?

Yes. Each chuck accepts frames up to 20 cm wide and 4 cm thick, and the holder adjusts vertically within a 4 cm range so your current screens will clamp and register correctly.

How do I verify the four colours line up before I start a production run?

Rotate each screen arm into the locating detent on the locating wheel; the positive stop confirms exact registration. Print a test on scrap fabric — if all four colours land without shift, the press is set up correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.