Intsupermai
Intsupermai Hydraulic Engine Hoist Folding Cherry Picker 2T
Folding hydraulic crane lifts 2 tonnes to 1.8 metres, rolls on six wheels and collapses for compact storage
- TypeHydraulic Tools
- Lifts up to 2 tonnes for heavy engines
- Folds flat to save valuable workshop space
- Six wheels allow easy positioning under loads
- 8 metre lift height clears tall engine bays
- Thickened steel construction handles 140 lb frame weight
Compact Hydraulic Lifting Crane
The Intsupermai hydraulic engine hoist is a 2T capacity cherry picker built from thickened steel for workshop lifting tasks. Its folding structure reduces storage footprint when the crane is not in use. Six wheels allow the unit to be moved around the shop floor with minimal effort. Effective lifting height reaches 1.8m with the boom extended.
Suited for Engine Removal, Not Overhead Construction
This hoist fits mechanics removing engines or positioning heavy components up to 2T within the 1.8m lift range. The 1.04m to 1.54m cantilever adjustment covers common engine bay reaches. Buyers needing higher lift points, longer reach beyond 1.54m, or continuous duty cycles on construction sites should consider larger floor cranes or overhead gantry systems instead.
Folding Frame Assembly With Heavy Components
The crane ships in major sub-assemblies weighing 140lbs total, so two people or a lift aid are recommended for initial setup. Wheels bolt to the base frame before the mast and boom are pinned in place. Hydraulic ram seals should be inspected for shipping damage before first pressurisation. Ensure all locking pins engage fully when unfolding; incomplete locking is the most common cause of instability during a lift.
Highlights
- Lifts up to 2 tonnes for heavy engines
- Folds flat to save valuable workshop space
- Six wheels allow easy positioning under loads
- 8 metre lift height clears tall engine bays
- Thickened steel construction handles 140 lb frame weight
Specifications
| Type | Hydraulic Tools |
|---|
Questions about this item
What clear floor space is needed for the 55.71×13.39 in main frame and 28.35×22.83 in base?
Allow at least 55.71 by 13.39 inches for the frame plus the 28.35 by 22.83 inch base; the six wheels need a flat, level surface to roll and stabilise the 140 lb unit.
Will the 1.04–1.54 m cantilever reach over a standard engine bay without moving the hoist?
The telescopic boom extends from 1.04 to 1.54 metres, so position the hoist close enough that the load stays within that horizontal range while the 2 T capacity is respected.
How do I confirm the hoist lifts to the rated 1.8 m height under load?
Raise a known weight slowly; the ram should stop at 1.8 metres effective lift height without drifting down, and the folding joints must stay locked throughout the stroke.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
