Intermatic
Intermatic T2005 7-day electromechanical timer contactor
A 7-day electromechanical timer with SPDT contacts rated 20 A at 120 V AC, offering up to 22 hours of on/off cycles and 84 trippers included
- 7-day scheduling covers a full week
- 20 A SPDT contact switches 120 V or 240 V loads
- Clutchless gears prevent slipping for reliable timing
- Steel NEMA 1 enclosure protects internal components
- 84 trippers included allow up to 6 on/off cycles per day
7-Day Electromechanical Timer Contactor
The Intermatic T2005 is a 7-day electromechanical timer contactor rated for 120 V AC at 20 A. It provides SPDT switching for loads up to 1/2 hp at 120 V or 1 hp at 240 V. The steel NEMA 1 enclosure suits indoor commercial and light-industrial control panels.
Practical Limits of the 7-Day Dial
The timer allows a maximum of six on/off cycles per day with a minimum setting of 2 hours and a maximum setting of 22 hours. Eighty-four trippers are included for programming, and extra trippers are available under part number 2E132. The day-skipper feature is not present, so the same daily schedule repeats every day of the week.
Surface Mounting with Clutchless Gears
The unit mounts with screws and uses heavy-duty clutchless gears designed to prevent slipping during operation. Installation is straightforward for qualified electricians familiar with 120 V control wiring. The main risk is exceeding the 20 A contact rating or the horsepower limits, which can cause contact welding or premature failure.
Highlights
- 7-day scheduling covers a full week
- 20 A SPDT contact switches 120 V or 240 V loads
- Clutchless gears prevent slipping for reliable timing
- Steel NEMA 1 enclosure protects internal components
- 84 trippers included allow up to 6 on/off cycles per day
Specifications
| Brand | INTERMATIC |
|---|
Questions about this item
Should I choose the 7-day version or is there a shorter-cycle model?
The T2005 is a 7-day electromechanical timer with a minimum setting of 2 hours and a maximum of 22 hours, providing up to 6 on/off cycles per day.
What does the 20 A rating mean for my actual load?
It supports 20 A at 120 V AC, 1/2 hp at 120 V and 1 hp at 240 V, so motor loads up to those horsepower limits can be switched directly.
Does the SPDT contact work with standard 120 V wiring?
Yes, the single-pole double-throw contact is rated for 120 V AC and the steel NEMA 1 enclosure is designed for indoor wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Value Brand Snap Action Switch Hinge Roller Lever Actuator SPDT 15 A 480 V
Telemecanique Sensors XZCP1141L5 Cordset 16.4 ft Black 250VAC/300VDC 4-Pin 18 AWG
- Manual Motor Switch…



